519644
55
Zoom out
Zoom in
Previous page
1/104
Next page
RangeMax Wireless Router WPN824v3 User Manual
Managing Your Network 4-13
v1.0, January 2008
Manually Checking for New Firmware
To manually check and upload new firmware:
Note: You cannot perform the following steps from a computer connected to the router
through a wireless link. You must use a computer connected to the router through
an Ethernet cable, and your Web browser must support HTTP uploads, such as
Microsoft Internet Explorer 6.0 or later, or Netscape Navigator 4.78 or later.
1. Log in to the wireless router.
2. Select Wireless Extender Status on the main menu. When the Wireless Extender Status
screen displays, note the version number of your router firmware.
3. Go to http://www.NETGEAR.com/support, and select Downloads from the menu bar.
4. From the Product Selection drop-down list, select WPN824v3. The Product Support page for
your router displays.
5. Under Downloads, check the most recent firmware version offered against the firmware
version shown on your Wireless Extender Status screen.
6. If the version on the NETGEAR website is more recent, click the version number. Then, click
Right-click and Save to Download, and save the file to a location on your hard disk.
Manually Upgrading Firmware
After you have downloaded firmware as described in the previous section, follow these steps to
upgrade your wireless router:
1. Log in to the wireless router.
2. Select Firmware Update under Maintenance in the main menu.
3. Click Browse and locate the unzipped firmware image that you downloaded to your PC (the
file ends in .img or .chk).
4. Once you have selected the file, click Upload to send the software to the router. The upload
process takes several minutes. When the software upload process is complete, the router
restarts.
Warning: Do not try to go online, turn off the router, shut down the computer, or do
anything else to the router until the router finishes restarting! When the
Test light stops blinking, wait a few seconds more before using the router.
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WPN824v3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WPN824v3 in the language / languages: English as an attachment in your email.

The manual is 2,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info