519515
53
Zoom out
Zoom in
Previous page
1/90
Next page
RangeMax NEXT Wireless Router Model WNR854T Reference Manual
Maintenance 4-11
v1.0, 2006-04
Erasing the Configuration
It is sometimes desirable to restore the router to the factory default settings. This can be done by
using the Erase function, which will restore all factory settings. After an erase, the router's
password will be password, the LAN IP address will be 192.168.1.1, and the router's DHCP client
will be enabled. For other default settings, refer to “Factory Default Settings” in Appendix A.
To erase the configuration, click the Erase button.
To restore the factory default configuration settings without knowing the login password or IP
address, you must use the Default Reset button on the rear panel of the router. See “Restoring the
Default Configuration and Password” on page 6-7.
Upgrading the Router Software
The routing software of the RangeMax NEXT Wireless Router is stored in FLASH memory, and
can be upgraded as new software is released by NETGEAR. Upgrade files can be downloaded
from the NETGEAR Web site. If the upgrade file is compressed (.ZIP file), you must first extract
the binary (.BIN or .IMG) file before sending it to the router. The upgrade file can be sent to the
router using your browser.
From the Main Menu of the browser interface, under the Maintenance heading, select the Router
Upgrade heading.
To upload new firmware:
1. Download and unzip the new software file from NETGEAR.
2. In the Router Upgrade menu, click the Browse button and browse to the location of the binary
(.BIN or .IMG) upgrade file
Note: Before upgrading the router software, use the router backup utility to save your
configuration settings. Any router upgrade will revert the router settings back to
the factory defaults. After completing the upgrade, you can restore your settings
from the backup.
Note: The Web browser used to upload new firmware into the RangeMax NEXT
Wireless Router must support HTTP uploads. NETGEAR recommends using
Microsoft Internet Explorer or Netscape Navigator 4.0 or higher.
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WNR854T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WNR854T in the language / languages: English as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info