670503
70
Zoom out
Zoom in
Previous page
1/78
Next page
Troubleshooting
70
N150 and N300 Wireless Routers
The Router Cannot Access the Internet
If you can log in to your router, but it cannot access the Internet, see if the router can obtain
an IP address from your Internet service provider (ISP). Unless your Internet provider
assigned you a fixed IP address, your router requests an IP address from the Internet
service. You can see if the request was successful using the Router Status screen.
Note: The Setup Wizard can detect your Internet connection during
installation, but if the router cannot get a WAN IP address, the Setup
Wizard cannot automatically resolve this issue.
If you are attempting to set up your NETGEAR router as a replacement for an ADSL gateway
in your network, the router cannot perform many gateway services. For example, the router
cannot convert ADSL or cable data into Ethernet networking information. NETGEAR does not
support such a configuration.
To check the WAN IP address:
1. Launch a web browser from a computer or wireless device that is connected to the
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4. Click the ADVANCED tab.
The Router Status screen displays.
5. In the Internet Port pane, check that an IP address is shown for the Internet port.
If 0.0.0.0 is shown, your router has not obtained an IP address from your ISP.
For more information about the Internet connection, see View the Internet Connection
Status on page 57.
6. If your router cannot obtain an IP address from the ISP, try to force your cable or DSL
broadband modem to recognize your new router by restarting your network in this order:
a. Unplug and turn off the cable or DSL broadband modem.
b. Unplug the router.
c. Plug in the cable or DSL broadband modem and turn it on.
d. Wait two minutes.
e. Plug in the router and wait two minutes.
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WNR2010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WNR2010 in the language / languages: English as an attachment in your email.

The manual is 2,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info