670503

Netgear WNR2010 Manual

59
Zoom out
Zoom in
Previous page
1/78
Next page
Manage Your Network
59
N150 and N300 Wireless Routers
PPPoE Connection
The Connect and Disconnect buttons in the Connection Status screen display only when
the connection mode is Manually Connect.
The following information displays for a PPPoE connection:
• Connection Time. The time that elapsed since the connection was established.
• Connection Status. The status of the connection: Connected, Disconnected, Negotiation
(---, Success), or Authentication (---, Success). --- indicates failure.
• IP Address. The IP address that is assigned to the router.
• Subnet Mask. The subnet mask that is assigned to the router.
To change the router PPPoE connection settings:
1. To establish the PPPoE connection manually, click the Connect button.
2. To terminate the PPPoE connection manually, click the Disconnect button.
3. To close the Connection Status screen, click the Close Window button.
PPTP Connection
The content of the Connection Status pop-up screen depends on the type of connection. The
Connect and Disconnect buttons in the Connection Status screen display only when the
connection mode is Manually Connect.
The following information displays for a PPTP connection:
• Connection Status. The status of the connection: Connected or Disconnected.
• IP Address. The IP address that is assigned to the router.
• Subnet Mask. The subnet mask that is assigned to the router.
To change the router PPTP connection settings:
1. To establish the PPTP connection manually, click the Connect button.
2. To terminate the PPTP connection manually, click the Disconnect button.
3. To close the Connection Status screen, click the Close Window button.
View Wireless Settings
To view the wireless settings:
1. Launch a web browser from a computer or wireless device that is connected to the
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the router user name and password.
… 59 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WNR2010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WNR2010 in the language / languages: English as an attachment in your email.

The manual is 2,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info