519657
84
Zoom out
Zoom in
Previous page
1/112
Next page
84 | Chapter 6: Using Network Monitoring Tools
N150 Wireless Router User Manual
Erasing the Configuration
Under some circumstances (for example, if you move the router to a different network or if
you have forgotten the password) you might want to erase the configuration and restore the
factory default settings. After an erase, the router’s username is admin, the password is
password, the LAN IP address is 192.168.1.1 (or www.routerlogin.net), and the router’s
DHCP server is enabled.
To erase the configuration, click the Erase button in the Settings Backup screen.
To restore the factory default configuration settings when you do not know the login
password or IP address, you must use the restore factory settings button on the rear panel of
the router (see
Restoring the Default Configuration and Password on page 100).
Updating the Router Firmware
The firmware of the WNR1000v3h2 router is stored in flash memory, and can be updated as
NETGEAR releases new firmware. You can update your firmware by logging into the router
and using one of these procedures:
Enable the Check for Updated Firmware Upon Log-in check box. Each time you log
in to the router, it will automatically detect a new version of the firmware and then install it.
This check box is enabled in the router’s default state. See
Logging In To Your Wireless
Router on page 7.
Use the Check button in the Router Upgrade screen. Instead of having the router
check for new firmware every time you log in, you can use Router Upgrade, under
Maintenance in the main menu. See
Checking for New Firmware in the Router Upgrade
Screen .”
Check for and update your firmware manually. You can compare versions, obtain new
firmware from NETGEAR’s website, and then upload it. See
Updating Manually to New
Router Firmware on page 86.
Note: Before updating the router software, NETGEAR recommends that
you save your configuration settings (see
Backing Up and Restoring
the Configuration on page 83). A firmware update might cause the
router settings to revert to the factory defaults. If this happens, after
completing the update, you can restore your settings from the
backup.
Checking for New Firmware in the Router Upgrade Screen
To check for new firmware and allow the router to automatically install it:
1. Select Router Upgrade under Maintenance in the main menu. The Router Upgrade
screen displays.
84


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WNR1000v3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WNR1000v3 in the language / languages: English as an attachment in your email.

The manual is 4,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear WNR1000v3

Netgear WNR1000v3 Installation Guide - English - 2 pages

Netgear WNR1000v3 Installation Guide - German - 2 pages

Netgear WNR1000v3 Installation Guide - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info