519657
34
Zoom out
Zoom in
Previous page
1/112
Next page
34 | Chapter 2: Safeguarding Your Network
N150 Wireless Router User Manual
Figure 10.
These options are available under WPS Settings:
Router’s PIN. The PIN is displayed so that you can use it to configure the router
through WPS (Wi-Fi Protected Setup) without using the Push Button or entering the
client’s PIN from the router management GUI. It is also displayed on the router’s
label.
Disable Router’s PIN. If the router’s PIN is disabled, you cannot run WPS through
the router’s PIN method.methods still work,. However, if your settings are already
configured, you can still add WPS-enabled wireless clients. The router might disable
the PIN if it detects suspicious attempts to break into your wireless settings; when this
happens, the check box is selected automatically by the router. You can enable the
PIN by clearing the check box and clicking Apply.
Keep Existing Wireless Settings. This check box is automatically selected to
prevent unwanted settings changes after WPS has been performed once
successfully. The check box is also selected if you have already specified wireless
security settings or your SSID without using WPS. When this check box is not
selected, adding a new wireless client successfully using the push button or the Add
WPS Client screen (see Push Button Configuration on page 31) changes the router’s
SSID and security passphrase. You might need to clear it if you are using certain
registrars, such as for a Windows Vista PC, to configure the router through WPS.
Connecting Additional Wireless Client Devices after WPS
Setup
You can add WPS-enabled and non-WPS-enabled client devices.
Adding Additional WPS-Enabled Clients
To add an additional wireless client device that is WPS enabled:
Note: Your wireless settings do not change when you add an additional
WPS-enabled client unless you have cleared the Keep Existing
Wireless Settings check box (in the Wireless Settings screen). If
you do clear the check box, once you’ve added a new wireless client
successfully through WPS, a new SSID and a passphrase are
generated, and all existing connected wireless clients are
disassociated and disconnected from the router.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WNR1000v3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WNR1000v3 in the language / languages: English as an attachment in your email.

The manual is 4,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear WNR1000v3

Netgear WNR1000v3 Installation Guide - English - 2 pages

Netgear WNR1000v3 Installation Guide - German - 2 pages

Netgear WNR1000v3 Installation Guide - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info