519657
30
Zoom out
Zoom in
Previous page
1/112
Next page
30 | Chapter 2: Safeguarding Your Network
N150 Wireless Router User Manual
Enable Wireless Router Radio. If you disable the wireless router radio, wireless
devices cannot connect to the WNR1000v3h2 router. If you will not be using your
wireless network for a period of time, you can clear this check box and disable all
wireless connectivity.
Enable SSID Broadcast. Clear this check box to disable broadcast of the SSID, so
that only devices that know the correct SSID can connect. Disabling SSID broadcast
nullifies the wireless network discovery feature of some products such as Windows
XP.
Enable WMM. Clear this check box to disable WMM. WMM (Wireless Multimedia), a
subset of the 802.11e standard, allows wireless traffic to have a range of priorities,
depending on the kind of data. Time-dependent information, like video or audio, will
have a higher priority than normal traffic. For WMM to function correctly, Wireless
clients must also support WMM.
Fragmentation Threshold, CTS/RTS Threshold, and Preamble Mode. The
Fragmentation Threshold, CTS/RTS Threshold, and Preamble Mode options are
reserved for wireless testing and advanced configuration only. Do not change these
settings.
WPS Settings. For information about these settings, see the section, Using Push 'N'
Connect (Wi-Fi Protected Setup) on page 30.
Wireless Card Access List. For information about this list, see Restricting Wireless
Access by MAC Address on page 35.
.
Using Push 'N' Connect (Wi-Fi Protected Setup)
If your wireless clients support Wi-Fi Protected Setup (WPS), you can use this feature to
configure the router’s network name (SSID) and security settings and, at the same time,
connect a wireless client securely and easily to the router. Look for the
symbol on your
client device. WPS automatically configures the network name (SSID) and wireless security
settings for the router (if the router is in its default state) and broadcasts these settings to the
wireless client.
Note: NETGEAR’s Push 'N' Connect feature is based on the Wi-Fi
Protected Setup (WPS) standard (for more information, see
http://www.wi-fi.org). All other Wi-Fi-certified and WPS-capable
products should be compatible with NETGEAR products that
implement Push 'N' Connect.
When you add wireless clients, whether or not they are WPS enabled, the added devices
must share the same network name (SSID) and security passphrase. For more information,
see Connecting Additional Wireless Client Devices after WPS Setup on page 34.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WNR1000v3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WNR1000v3 in the language / languages: English as an attachment in your email.

The manual is 4,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear WNR1000v3

Netgear WNR1000v3 Installation Guide - English - 2 pages

Netgear WNR1000v3 Installation Guide - German - 2 pages

Netgear WNR1000v3 Installation Guide - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info