519654
70
Zoom out
Zoom in
Previous page
1/82
Next page
WNHDE111 5GHz Wireless-N HD Access Point/Bridge User Manual
8-2 Troubleshooting
v1.1, May 2008
Make sure that the Ethernet cables are securely plugged in.
The Internet status light on the wireless range extender is on if the Ethernet cable connecting
the wireless range extender and the network is plugged in securely and the WNHDE111 is
turned on.
Be sure the LED on/off button on the back panel is set to on so that you can monitor the status
lights.
Make sure that the wireless settings in the computer and WNHDE111 match
exactly.
For a wirelessly connected computer, the wireless network name (SSID) and WEP or WPA
security settings of the WNHDE111 and wireless computer must match exactly.
If you have enabled the wireless range extender to restrict wireless access by MAC address,
you must add the wireless computers MAC address to the routers wireless card access list.
Make sure that the network settings of the computer are correct.
Wired and wirelessly connected computers must have network (IP) addresses on the same network
as the WNHDE111. The simplest way to do this is to configure each computer to obtain an IP
address automatically using DHCP. Click the link to the online document “Preparing Your
Network” in Appendix B, or see the documentation that came with your computer.
Troubleshooting Basic Functions
After you turn on power to the unit, the following sequence of events should occur:
1. When power is first applied, verify that the LED push button is set to on, and the Power light
is on.
2. After approximately 10 seconds, verify that:
a. The Power light is solidly on.
b. The status lights of any in-use Ethernet LAN port are on. This indicates that a link has
been established to the connected device.
If any of the above conditions does not occur, see the appropriate following section.
The Power light is not on or is blinking.
If the Power and other lights are off when your unit is turned on:
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WNHDE111 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WNHDE111 in the language / languages: English as an attachment in your email.

The manual is 2,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info