519190
107
Zoom out
Zoom in
Previous page
1/126
Next page
Troubleshooting
107
N900 Wireless Dual Band Gigabit Router WNDR4500
LEDs Never Turn Off
When the router is turned on, the LEDs turn on for about 10 seconds and then turn off. If all
the LEDs stay on, there is a fault within the router.
If all LEDs are still on 1 minute after power-up:
Cycle the power to see if the router recovers.
Press and hold the Reset button to return the router to its factory settings as explained in
Restore the Factory Settings and Password on page 111.
If the error persists, you might have a hardware problem and should contact technical
support at
www.netgear.com/support.
Internet or Ethernet Port LEDs Are Off
If either the Ethernet port LEDs or the Internet LED does not light when the Ethernet
connection is made, check the following:
Make sure that the Ethernet cable connections are secure at the router and at the modem
or computer.
Make sure that power is turned on to the connected modem or computer.
Be sure that you are using the correct cable:
When connecting the router’s Internet port to a cable or DSL modem, use the cable that
was supplied with the cable or DSL modem. This cable could be a standard
straight-through Ethernet cable or an Ethernet crossover cable.
Wireless LEDs Are Off
If the Wireless LEDs stay off, check to see if the Wireless On/Off button on the router has
been pressed. This button turns the wireless radios in the router on and off. The Wireless
LEDs are lit when the wireless radio is turned on.
The Push 'N' Connect (WPS) Button Blinks Amber
If after using the WPS function the button blinks amber, check the following:
Make sure that you are using the button and not the router’s built-in registrar.
Check that PIN verification has succeeded for the wireless device you are adding to the
wireless network.
Make sure you have not pressed the WPS button on the side of the router after disabling
the WPS feature (you logged in to the router and disabled this previously).
Check that the router is not in the temporary AP setup locked state (if you are using the
wireless repeater function).
107


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WNDR4500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WNDR4500 in the language / languages: English as an attachment in your email.

The manual is 5,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear WNDR4500

Netgear WNDR4500 User Manual - English - 16 pages

Netgear WNDR4500 Installation Guide - German - 2 pages

Netgear WNDR4500 User Manual - German - 142 pages

Netgear WNDR4500 Installation Guide - Dutch - 22 pages

Netgear WNDR4500 User Manual - Dutch - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info