519046
118
Zoom out
Zoom in
Previous page
1/129
Next page
Troubleshooting
118
N750 Wireless Dual Band Gigabit Router WNDR4300
If the error persists, you might have a hardware problem and should contact technical support
at
www.netgear.com/support.
Internet LED Is Off
If the Internet LED does not light, check the following:
Make sure that the Ethernet cable connections are secure at the router and at the modem
or computer.
Make sure that power is turned on to the connected modem or computer.
Be sure that you are using the correct cable.
When connecting the router’s Internet port to a cable or DSL modem, use the cable that
was supplied with the cable or DSL modem. This cable could be a standard
straight-through Ethernet cable or an Ethernet crossover cable.
2.4 GHz and 5 GHz LEDs Are Off
If these LEDs stay off, check to see if the Wi-Fi On/Off button on the router has been pressed.
This button turns the wireless radios in the router on and off. The 2.4 GHz and 5 GHz LEDs
are lit when the wireless radios are turned on.
Cannot Log In to the Router
If you are unable to log in to the router from a computer on your local network, check the
following:
If you are using an Ethernet-connected computer, check the Ethernet connection
between the computer and the router as described in the previous section.
Make sure that your computer’s IP address is on the same subnet as the router. If you are
using the recommended addressing scheme, your computer’s address should be in the
range of 192.168.1.2 to 192.168.1.254.
If your computer’s IP address is shown as 169.254.x.x, recent versions of Windows and
Mac OS generate and assign an IP address if the computer cannot reach a DHCP server.
These autogenerated addresses are in the range of 169.254.x.x. If your IP address is in
this range, check the connection from the computer to the router, and reboot your
computer.
If your router’s IP address was changed and you do not know the current IP address,
clear the router’s configuration to factory defaults. This sets the router’s IP address to
192.168.1.1. This procedure is explained in
Factory Settings on page 123.
Make sure that your browser has Java, JavaScript, or ActiveX enabled. If you are using
Internet Explorer, click Refresh to be sure that the Java applet is loaded.
Try quitting the browser and launching it again.
118


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WNDR4300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WNDR4300 in the language / languages: English as an attachment in your email.

The manual is 3,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear WNDR4300

Netgear WNDR4300 Installation Guide - English - 2 pages

Netgear WNDR4300 Installation Guide - German - 2 pages

Netgear WNDR4300 User Manual - German - 144 pages

Netgear WNDR4300 Installation Guide - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info