519653
102
Zoom out
Zoom in
Previous page
1/119
Next page
Troubleshooting
102
N600 Wireless Dual Band Router WNDR3400v3
Troubleshoot with the LEDs
After you turn on power to the router, the following sequence of events should occur:
1. When
power is first applied, verify that the Power/Test LED is lit.
2. V
erify that the Power/Test LED turns amber within a few seconds, indicating that the self-test
is running.
3. Af
ter approximately 30 seconds, verify:
Th
e Power/Test LED is solid green.
Th
e Internet LED is lit.
A numbered Ethern
et port LED is lit for any local port that is connected to a computer.
This indicates that a link has been established to the connected device.
The LEDs on the front panel of the router can be used for troubleshooting.
Power/Test LED Is Off or Blinking
Make sure that the power cord is securely connected to your router and that the power
adapter is securely connected to a functioning power outlet.
Make
sure that you are using the 12V DC, 2.5A power adapter that NETGEAR supplied
for this product.
If
the Power/Test LED blinks slowly and continuously, the router firmware is corrupted.
This can happen if a firmware upgrade is interrupted, or if the router detects a problem
with the firmware. If the error persists, you have a hardware problem. tFor recovery
instructions or help with a hardware problem, contact technical support at
http://support.netgear.com/general/contact/default.aspx.
Power/Test LED Stays Amber
When the router is turned on, the Power/Test LED turns amber for about 20 seconds and
then turns green. If the LED does not turn green, the router has a problem.
If the Power/Test LED is still amber 1 minute after you turn on power to the router:
1. T
urn the power off and back on to see if the router recovers.
2. Press and ho
ld the Restore Factory Settings button to return the router to its factory
settings. See Factory Settings on
page 110.
If the error persists, you might have a hardware problem and should contact technical support
at www.netgear.com/support.
LEDs Never Turn Off
When the router is turned on, the LEDs light for about 10 seconds and then turn off. If all the
LEDs stay lit, the fault is within the router.
102


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WNDR3400v3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WNDR3400v3 in the language / languages: English as an attachment in your email.

The manual is 8,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear WNDR3400v3

Netgear WNDR3400v3 Installation Guide - English - 2 pages

Netgear WNDR3400v3 Installation Guide - German - 2 pages

Netgear WNDR3400v3 User Manual - German - 134 pages

Netgear WNDR3400v3 Installation Guide - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info