519491
107
Zoom out
Zoom in
Previous page
1/136
Next page
ProSafe Dual Band Wireless-N Access Point WNDAP350 Reference Manual
Troubleshooting and Debugging 5-3
v1.1, November 2009
The access point’s default values may not work with your network. Check the access point
default configuration against the configuration of other devices in your network.
I cannot connect to the WNDAP350 to configure it.
Check these items:
The WNDAP350 is properly installed, LAN connections are OK, and it is powered on. Check
that the LAN port LED is green to verify that the Ethernet connection is OK.
The default configuration of the WNDAP350 is for a static IP address of 192.168.0.237 and a
Mask of 255.255.255.0 with DHCP disabled. Make sure your network configuration settings
are correct.
If you are using the NetBIOS name of the WNDAP350 to connect, ensure that your computer
and the WNDAP350 are on the same network segment or that there is a WINS server on your
network.
If your computer is set to “Obtain an IP Address automatically” (DHCP client), restart it.
If your computer uses a Fixed (Static) IP address, ensure that it is using an IP Address in the
range of the WNDAP350. The WNDAP350 default IP Address is 192.168.0.237 and the
default Subnet Mask is 255.255.255.0. If you are not sure about these settings, follow the
instructions for “Installing the WNDAP350 wirelss access point” on page 2-4.
When I enter a URL or IP address I get a timeout error.
A number of things could be causing this. Try the following troubleshooting steps.
Check whether other PCs work. If they do, ensure that your PCs TCP/IP settings are correct. If
using a Fixed (Static) IP Address, check the Subnet Mask, Default Gateway, DNS, and IP
Addresses.
If the PCs are configured correctly, but still not working, ensure that the WNDAP350 is
connected and turned on. Connect to it and check its settings. If you cannot connect to it, check
the LAN and power connections.
If the WNDAP350 is configured correctly, check your Internet connection (DSL/Cable
modem etc.) to make sure that it is working correctly.
•Try again.
107


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WNDAP350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WNDAP350 in the language / languages: English as an attachment in your email.

The manual is 2,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info