710737
51
Zoom out
Zoom in
Previous page
1/58
Next page
4-1
v1.0, December 2007
Chapter 4 Troubleshooting
This chapter provides information about troubleshooting your RangeMax Dual Band Wireless-N
USB Adapter WNDA3100. For information about connecting to wireless networks and the
Internet, see “Basic Setup” in Chapter 1.
Troubleshooting Tips
Use the following information to solve common problems you may encounter. Also, refer to the
knowledge base on the NETGEAR website at http://www.netgear.com/support/main.asp.
Table 4-1. Troubleshooting Tips
Problem Action
The LED is not lit. The WNDA3100 is not connected to the USB port correctly or
the WNDA3100 software is not loaded.
Remove and reinsert the WNDA3100.
Check the Windows device manager to see if the
WNDA3100 is recognized and enabled. Reload the
WNDA3100 software, if necessary.
Try to install the WNDA3100 in a different USB slot on your
system if one is available.
The LED blinks, but the WNDA3100 is not
connected to an access point.
The WNDA3100 is trying to connect to an access point, but
cannot connect.
The access point might not be powered on.
The access point and the WNDA3100 are not configured
with the same wireless parameters. Check the SSID and
wireless security settings.
I cannot connect to an access point.
The access point is available, and there is
good signal strength.
If the access point is WPA-PSK protected, you need the
correct WPA-PSK passphrase. Otherwise, the WNDA3100
is still connected to the previous access point, and you
cannot change to the WPA-PSK access point.
If the access point is WEP protected (either 64- or 128- bit
encryption), you are prompted to enter the WEP encryption
security information.
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WNDA3100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WNDA3100 in the language / languages: English as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info