519518
2
Zoom out
Zoom in
Previous page
1/2
Next page
September 2007
This symbol was placed in accordance with the European Union Directive 2002/96 on the
Waste Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the
European Union, this product should be treated and recycled in accordance with the laws of
your jurisdiction implementing the WEEE Directive.
© 2007 by NETGEAR, Inc. All rights reserved. NETGEAR, the NETGEAR logo and RangeMax are trademarks
or registered trademarks of NETGEAR, Inc. in the United States and/or other countries. Other brand and product
names are trademarks or registered trademarks of their respective holders. Information is subject to change with-
out notice.
Now, Verify Wireless Connectivity
Using a computer with an 802.11g, 802.11b or 802.11n wireless adapter, verify
connectivity by using a browser such as Netscape®, Internet Explorer or Mozilla
Firefox® to connect to the Internet, and check for file and printer access on your network.
Note: If you cannot connect, see the Troubleshooting Tips in this guide or the link to the
NETGEAR RangeMax NEXT Wireless-N Access Point WN802T Reference Manual on the
Resource CD.
Troubleshooting Tips
Here are some tips for correcting simple problems you may have.
No lights are lit on the access point.
The access point has no power.
Make sure the Power Supply is connected to the access point and plugged in to a
working power outlet or power strip.
Make sure you are using the Netgear Switching Power Supply supplied with your
access point.
The Ethernet light is not lit.
There is a hardware connection problem.
Make sure the cable connectors are securely plugged in at the access point and the
network device (hub, switch, or router).
Make sure the connected device is turned on.
The WLAN light is not lit.
The access point’s antennas are not working.
If the Wireless LAN activity light stays off, disconnect the adapter from its power
source and then plug it in again.
Contact NETGEAR if the WLAN light remains off.
I cannot configure the access point from a browser.
Check these items:
The WN802T is properly installed and it is powered on. Check that the Ethernet port
LED is green to verify that the Ethernet connection is OK.
If your PC uses a Fixed (Static) IP address, ensure that it is using an IP Address in the
range of the WN802T. The WN802T default IP Address is 192.168.0.233 and the
default Subnet Mask is 255.255.255.0. The WN802T default setting is for a static IP
address. If the network where you are connecting it is using DHCP, configure it
accordingly. See the Reference Manual on the Resource CD for the Wireless Access
Point for more details.
Note: The factory default reset button and the default settings for your wireless-N
access point are located on the label at the rear of your WN802T.
I cannot access the Internet or the LAN with a wireless capable
computer.
There is a configuration problem. Check these items:
You may not have restarted the computer with the wireless adapter to have TCP/IP
changes take effect. Restart the computer.
The computer with the wireless adapter may not have the correct TCP/IP settings to
communicate with the network. Restart the computer and check that TCP/IP is set up
properly for that network. The usual setting for Windows on the Network Properties
is set to “Obtain an IP address automatically.”
The access point’s default values may not work with your network. Check the access
point default configuration against the configuration of other devices in your network.
For full instructions on changing the access point’s default values, consult the
documentation links on the Resource CD or on the menu of the wireless-N access
point user interface.
Technical Support
Thank you for selecting NETGEAR products.
To register your product, go to: http://www.NETGEAR.com/register
Go to http://www.NETGEAR.com/support for support information.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WN802T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WN802T in the language / languages: English as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear WN802T

Netgear WN802T User Manual - English - 78 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info