519518
59
Zoom out
Zoom in
Previous page
1/78
Next page
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual
Advanced Wireless Bridging 5-3
v1.0, August 2007
The following figure illustrates a multi-point bridge setup over three LAN segments.
To configure wireless access points in a multi-point configuration:
1. Set the Operating Mode of the three RangeMax NEXTs as follows:
Configure AP2 on LAN Segment 1 in Point-to-Point Bridge Mode. Enable Wireless Client
Association and add the Remote MAC Address of AP1 on LAN Segment 2.
Because it is in the central location, configure AP1 on LAN Segment 2 in Multi-Point
Bridging mode. Enable Wireless Client Association and add the MAC addresses of the
adjacent Point-to-Point APs (AP2 and AP3).
Configure AP3 on LAN 3 in Point-to-Point Bridge mode. Enable Wireless Client
Association and add the Remote MAC Address of AP1 on LAN Segment 2.
2. Verify the following parameters for all three wireless access points:
That the LAN network configuration of each of the RangeMax NEXTs is configured to
operate in the same LAN network address range as the other LAN devices (routers, hubs
and switches).
That only one wireless access point is configured in Multi-Point Bridging mode, and that
all the others are in Point-to-Point Bridge mode.
That all APs are be on the same LAN. That is, all the wireless access point LAN IP
addresses are in the same network.
Figure 5-2
AP2
AP1
AP3
LAN
Segment 1
LAN
Segment 2
LAN
Segment 3
PCs
PCs
PCs
Router
Hub or Switch
Hub or Switch
Wireless PC Card
in a Notebook Computer
192.168.0.1
Internet
Point-to-Point
Bridge Mode
Point-to-Point
Bridge Mode
Multi-Point
Bridge Mode
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WN802T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WN802T in the language / languages: English as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear WN802T

Netgear WN802T Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info