519518
24
Zoom out
Zoom in
Previous page
1/78
Next page
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual
2-6 Installation and Configuration
v1.0, August 2007
2. Enter the Access Point Name of the WN802T.
This unique name is the access point NetBIOS name. The Access Point Name is printed on the
rear label of the WN802T. The default is netgearxxxxxx, where xxxxxxx represents the last 6
digits of the WN802T MAC address. You may modify the default name with a unique name
up to 15 characters long.
3. Enter the IP Address fields of the WN802T.
DHCP Client. By default, the Dynamic Host Configuration Protocol (DHCP) client is
disabled. If you have a DHCP server on your LAN and you enable DHCP, the wireless
access point will get its IP address, subnet mask and default gateway settings
automatically from the DHCP server on your network when you connect the WN802T to
your LAN.
IP Address. Enter the IP Address of your wireless access point.The default IP address is
192.168.0.233. To change it, enter an unused IP address from the address range used on
your LAN; or enable DHCP.
IP Subnet Mask. The Access Point will automatically calculate the subnet mask based on
the IP address that you assign. Otherwise, you can use 255.255.255.0 (the default) as the
subnet mask.
Figure 2-3
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WN802T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WN802T in the language / languages: English as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear WN802T

Netgear WN802T Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info