519666
27
Zoom out
Zoom in
Previous page
1/33
Next page
Troubleshooting
27
Universal WiFi Range Extender WN2000RPT
- A workable performance is delivered when the Link Rate LED is amber and the
PC to Extender Connection LED
is green.
If you cannot get a wireless connection working, you can use an Ethernet cable to
connect your computer to the extender. See Connect a PC to the Extender with an
Ethernet Cable on page 8.
Joining Wireless Networks
To join a wireless network you must know its network name (also called the SSID) so that you
can select it. If the network is secure, you must know the passphrase or wireless key. If the
extender does not connect to the network that you chose, the following message displays:
Connection was not established to the selected network.
If this happens it could be due to one of these reasons:
The network name, passphrase, or key might have been typed incorrectly. Click Cancel,
use the Smart Wizard to select the network from the list, and retype the passphrase or
key. This is case-sensitive. PASSWORD25 is not the same as Password25 or
password25. See Use the Setup Wizard on page 10.
If the Smart Wizard does not find your wireless network (it is not displayed in the Select
Existing Network screen), check to see if your wireless network is still up and running.
Make sure that the router is turned on. If possible, move the extender closer to the router
and click Try Again.
If the extender WLAN LED is red, this indicates a poor wireless connection. The best
connection is established when there is a clear line of sight between the extender and the
router you are connecting to. Make sure that there are no physical obstacles between the
extender and the router, and try to move the extender closer to the router.
If you use the Smart Wizard, and the extender cannot connect to the router or cannot get an
IP address from the router, it displays the following message:
You are not able to connect to the Internet. Click Continue to run through set up again to
connect to your network.
If you click Continue, the Smart Wizard starts again (see Use the Setup Wizard on page 10).
If you click Exit, the Status screen displays with menu selections on the left (see Log In to the
Extender on page 9).
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WN2000RPT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WN2000RPT in the language / languages: English as an attachment in your email.

The manual is 2,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear WN2000RPT

Netgear WN2000RPT Installation Guide - English - 16 pages

Netgear WN2000RPT Installation Guide - German - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info