519682
113
Zoom out
Zoom in
Previous page
1/134
Next page
| 113
WG102-500, WGAP150 ProSafe™ 802.11g Wireless Access Point
You Cannot Access the Internet or the LAN from a
Wireless-Capable Computer
There is a configuration problem. Check the following:
You may not have restarted the computer with the wireless adapter to allow TCP/IP
changes take effect. Restart the computer.
The computer with the wireless adapter may not have the correct TCP/IP settings to
communicate with the network. Restart the computer and check that TCP/IP is set up
properly for that network. The usual setting for Windows the Network Properties is set to
“Obtain an IP address automatically.”
The wireless access point’s default values may not work with your network. Check the
wireless access point default configuration against the configuration of other devices in
your network.
Make sure that the SSID, network authentication, and data encryption settings of the
computer with the wireless adapter are same as those of the wireless access point.
Ping the IP address of the wireless access point to verify that there is a wireless
connection between the computer with the wireless adapter and the wireless access
point. If the ping fails, check the network configuration.
Ping the default gateway to verify that there is a path from the computer with the wireless
adapter to the default gateway. If the ping fails, check the network configuration or call the
Internet service provider (ISP).
You Cannot Configure the Wireless Access Point from a
Browser
Check the following:
Make sure that the wireless access point is configured to accept configuration from a
browser. Check the following:
- Web management is enabled (see “Disabling Web Management Access Entirely”
on page 81).
- Web management access is properly configured, and if the Web Access Control
feature is enabled, the IP address of your computer is in the Management IP table
(see
“Configuring Web Management Access” on page 78).
- If you attempt to access the wireless access point form a wireless computer, the
wireless access point is configured to accept Web management from a wireless
client (see
“Disabling Web Management Access from Wireless Clients” on
page 80).
The wireless access point is properly installed, LAN connections are OK, and it is
powered on. Check that the LAN LED is on to verify that the Ethernet connection is OK.
113


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WGAP150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WGAP150 in the language / languages: English as an attachment in your email.

The manual is 3,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear WGAP150

Netgear WGAP150 Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info