519682
100
Zoom out
Zoom in
Previous page
1/134
Next page
100 |
WG102-500, WGAP150 ProSafe™ 802.11g Wireless Access Point
4.
Table 5-2. Advanced Wireless Settings
Field Description
Max. Total Associated
Clients
Specify the total maximum number of wireless clients that are allowed to
connect to the wireless access point. The default setting is 0, which
indicates a limitless number of wireless clients.
Note: The “Configuring Advanced QoS Settings” on page 57 explains how
to specify the maximum number of wireless clients that are allowed to
connect to an individual SSID. The maximum total associated clients for
the wireless access point overrides the sum of all wireless clients that are
allowed to connect to all 16 SSIDs.
Beacon Rate Select the beacon transmit bit rate from the pull-down menu:
1Mbps. This is the default setting.
2Mbps.
5.5Mbps.
6Mbps.
11Mbps.
Beacon Interval Select the interval for each beacon transmission from the pull-down menu:
100ms.This is the default setting.
250ms.
500ms.
DTIM The frequency for the beacon to include a Delivery Traffic Indication
Message (DTIM) in milliseconds. The default setting is 3 milliseconds.
Fragmentation Length This is the maximum packet size that is used for fragmentation. Packets
larger than this size will be fragmented. The default is 2346.
Distance / Time Convertor Use the on-screen slider to determine the recommended values for the slot
time, ACK timeout, and CTS timeout (see below). You can also enter the
distance in meters in the field below the slider, and then click in one of the
three fields below to determine the recommended values. The default value
is 0 meters.
Slot Time The period in microseconds before packet transmission occurs from the
wireless access point. (The slot time usually equals the maximum
theoretical time for a packet to travel from the wireless access point to the
target and back.) The default setting is 9 microseconds. Click Default to
return the field to its default value.
ACK Timeout The period in microseconds that is allowed for reception of an
acknowledgement (ACK) packet by the wireless access point before the
packet retransmission occurs. The default setting is 48 microseconds. Click
Default to return the field to its default value.
Preamble Type Select one of the following radio buttons:
Auto. A short transmit preamble provides better performance. Auto
automatically handles both long and short preambles. The default setting
is Auto.
Long. A long transmit preamble may provide a more reliable connection or
slightly longer range.
Click Save or Save to Flash & Activate to save your settings.
100


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WGAP150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WGAP150 in the language / languages: English as an attachment in your email.

The manual is 3,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear WGAP150

Netgear WGAP150 Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info