519682
85
Zoom out
Zoom in
Previous page
1/134
Next page
| 85
WG102-500, WGAP150 ProSafe™ 802.11g Wireless Access Point
3. Next to Telnet Server, select the Enabled checkbox. This checkbox is deselected by default.
4. Click Save or Save to Flash & Activate to save your settings.
SNMP Remote Management
SNMP forms part of the internet protocol suite as defined by the Internet Engineering Task
Force (IETF). SNMP is used in network management systems to monitor network-attached
devices for conditions that warrant administrative attention.
SNMP exposes management data in the form of variables on the managed systems, which
describe the system configuration. These variables can then be queried (and sometimes set)
by managing applications
Enable SNMP to allow SNMP network management software such as HP OpenView to
manage the wireless access point via the SNMPv1, SNMPv2, and/or SNMPv3 protocol.
Configuring SNMP Settings
To configure and enable SNMP:
1. Log in to the wireless access point at its default LAN address of http://192.168.0.229
with its default user name of admin and default password of password, or using
whatever LAN address, user name, and password you have chosen for the wireless
access point.
2. Select Configuration > SNMP > Basic. The SNMP Basic Settings screen displays (see
Figure 4-19 on page 86).
Figure 4-18
85


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WGAP150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WGAP150 in the language / languages: English as an attachment in your email.

The manual is 3,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear WGAP150

Netgear WGAP150 Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info