519682
44
Zoom out
Zoom in
Previous page
1/134
Next page
44 |
WG102-500, WGAP150 ProSafe™ 802.11g Wireless Access Point
Configuring WPA+WPA2 and WPA-PSK+WPA2-PSK Mixed Modes
WPA+WPA2 security requires RADIUS-based 802.1x authentication, so you also must define
RADIUS server settings. For information about RADIUS servers, see
“Configuring RADIUS
Server Settings” on page 45. WPA-PSK+WPA2-PSK security uses a pre-shared key (PSK)
and does not require authentication from a RADIUS server. Depending on the wireless client,
these mixed modes use either TKIP or AES encryption.
When you select WPA-TKIP and WPA2-AES from the Security Policy pull-down menu, the
section expands to display the WPA-TKIP and WPA2-AES fields.
Figure 3-8 shows
Pre-Shared Key user authentication as an example.
Specify the fields that are explained in Table 3-6.
Figure 3-8
Table 3-6.
Field Descriptions
User
Authentication
Pre-Shared Key From the User Authentication pull-down menu, select the Pre-Shared
Key to enable WPA-PSK+WPA2-PSK. This mixed mode does not
require a RADIUS server for authentication, but you must specify a
passphrase.
Passphrase Enter a passphrase with a length must between 8 and 63
characters (inclusive).
Click the Hide / Show Passphrase hyperlink to switch
between hiding and showing the passphrase on screen.
Hiding the passphrase provides added security in a
public environment.
RADIUS From the User Authentication pull-down menu, select RADIUS to
enable WPA+WPA2, which requires a RADIUS server for
authentication (see
“Configuring RADIUS Server Settings” on page
45). This is the default user authentication setting.
Re-Keying
Period
The period during which the broadcast key remains valid. When the period expires, the
broadcast key is no longer valid and must be renewed. The default is 3600 seconds
(1
hour).
Re-key on
re-keying period
Select the Re-key on re-keying period checkbox to require rekeying after the rekeying
period has expired.
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WGAP150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WGAP150 in the language / languages: English as an attachment in your email.

The manual is 3,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear WGAP150

Netgear WGAP150 Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info