519682
35
Zoom out
Zoom in
Previous page
1/134
Next page
| 35
WG102-500, WGAP150 ProSafe™ 802.11g Wireless Access Point
WEP. Wired Equivalent Privacy (WEP) data encryption provides data security. WEP
Shared Key authentication and WEP data encryption block all but the most determined
eavesdropper. This data encryption mode has been superseded by WPA-PSK and
WPA2-PSK. For information about how to configure static and dynamic WEP, see
“Configuring Static WEP” on page 40 and “Configuring Legacy 802.1X (or Dynamic
WEP)” on page 41.
WPA and WPA-PSK (TKIP). Wi-Fi Protected Access (WPA) data encryption provides
strong data security with Temporal Key Integrity Protocol (TKIP) encryption. The very
strong authentication along with dynamic per frame rekeying of WPA make it virtually
impossible to compromise. WPA uses RADIUS-based 802.1x authentication; WPA-PSK
uses a pre-shared key (PSK) for authentication. For information about how to configure
WPA, see
“Configuring WPA and WPA-PSK (TKIP)” on page 41.
WPA2 and WPA2-PSK (AES). Wi-Fi Protected Access version 2 (WPA2) data encryption
provides strong data security with Advanced Encryption Standard (AES) encryption. The
very strong authentication along with dynamic per frame rekeying of WPA2 make it
virtually impossible to compromise. WPA2 uses RADIUS-based 802.1x authentication;
WPA2-PSK uses a pre-shared key (PSK) for authentication. For information about how to
configure WPA2, see
“Configuring WPA2 and WPA2-PSK (AES)” on page 43.
WPA+WPA2 and WPA-PSK+WPA2-PSK Mixed Modes. These modes support data
encryption either with both WPA and WPA2 clients or with both WPA-PSK and
WPA2-PSK clients and provide the most reliable security. For information about how to
configure WPA+WPA2 and WPA-PSK+WPA2-PSK, see
“Configuring WPA+WPA2 and
WPA-PSK+WPA2-PSK Mixed Modes” on page 44.
Security Profiles
Security profiles let you configure unique security settings for each SSID. The wireless
access point supports up to 16 BSSIDs that you can configure in the individual Edit Wireless
Network screens that are accessible from the Wireless Networks screen (see
“Creating and
Editing Security Profiles” on page 37).
To set up a security profile you select its network authentication type, data encryption,
wireless client security separation, and VLAN ID:
Network Authentication
The wireless access point is set by default as an open system with no authentication.
When you configure network authentication, bear in mind that not all wireless adapters
support WPA or WPA2. Windows XP, Windows 2000 with Service Pack 3, and Windows
Vista do include the client software that supports WPA. However, client software is
required on the client. Consult the product documentation for your wireless adapter and
WPA or WPA2 client software for instructions on configuring WPA2 settings.
For information about the types of network authentication that the wireless access point
supports, see
“Creating and Editing Security Profiles” on page 37.
Data Encryption
Select the data encryption that you want to use. The available options depend on the
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WGAP150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WGAP150 in the language / languages: English as an attachment in your email.

The manual is 3,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear WGAP150

Netgear WGAP150 Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info