519671
44
Zoom out
Zoom in
Previous page
1/78
Next page
NETGEAR 54 Mbps Wireless Access Point WG602v4 Reference Manual
3-2 Management
v1.0, June 2007
This screen displays the following parameters:
Viewing a List of Attached Devices
The Station List table contains a list of all devices associated with this wireless access point in the
wireless network defined by their Wireless Network Name (SSID). The feature is not available
when in Client Mode.
Table 3-1. General Information Fields
Field Description
Access Point Information
Access Point Mode Shows the current operating mode of the device: AP, Bridge,
Repeater or Client.
Access Point Name The default name can be changed if desired.
MAC Address Displays the Media Access Control address (MAC Addresses) of the
wireless access point’s Ethernet port.
Region Displays the country or region for which the wireless access point is
licensed for use. It may not be legal to operate this wireless access
point in a region other than one of those identified in this field.
Firmware Version The version of the firmware currently installed.
Current IP Settings – These parameters apply to the Local WG602v4 wireless access point.
IP Address The IP address of the wireless access point.
Subnet Mask The subnet mask for the wireless access point.
Default Gateway The default gateway for the wireless access point.
DHCP Client Enabled by default. Enabled (DHCP client) indicates that the current
IP address was obtained from a DHCP server on your network.
Wireless Settings – These parameters apply to the target remote WG602v4, VPN gateway, or VPN client.
Wireless Network Name (SSID) Displays the wireless network name (SSID) being used by the
wireless port of the wireless access point. The default is NETGEAR.
Associated AP (Client mode
only)
The MAC address of a remote AP or peer that this wireless access
point is connected to.
Channel Identifies the channel the wireless port is using.
Encryption Type The current encryption setting.
Access Control Restricts wireless access by MAC address. Disabled by default.
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WG602v4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WG602v4 in the language / languages: English as an attachment in your email.

The manual is 2,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear WG602v4

Netgear WG602v4 Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info