519681
116
Zoom out
Zoom in
Previous page
1/134
Next page
116 |
WG102-500, WGAP150 ProSafe™ 802.11g Wireless Access Point
PING -n 10 IP address
where IP address is the IP address of a remote device such as your ISP’s DNS server.
If the path is functioning correctly, replies as in the previous section display. If you do not
receive replies:
Check that your PC has the IP address of your router listed as the default wireless access
point. If the IP configuration of your PC is assigned by DHCP, this information is not
visible in your PC’s Network Control Panel. Verify that the IP address of the router is
listed as the default wireless access point as described in the online document that you
can access from
“Preparing Your Network” in Appendix B.
Check to see that the network address of your PC (the portion of the IP address specified
by the netmask) is different from the network address of the remote device.
Check that your cable or DSL modem is connected and functioning.
If your ISP assigned a host name to your PC, enter that host name as the account name
in the Basic Settings screen.
Using the Reset Button to Restore Factory Default Settings
To use the Reset button (see “Rear Panel” on page 11) to clear all data and restore the
factory default values:
1. Push and hold the Reset button for about five seconds (you may have to push hard).
2. Release the Reset button. A few seconds later, only the power LED of the wireless access
point remains on, indicating that the wireless access point has rebooted. After several
minutes, the factory default configuration will be restored, and the wireless access point will
be ready for use.
Note: After restoring the factory default configuration, the wireless access
point’s default LAN IP address will be 192.168.0.229, the default
login user name will be admin, and the default login password will be
password.
Problems with Date and Time
The Basic screen that is accessible through the Monitor > System > Basic menus choices
displays the current date and time of day. The wireless access point uses the Network Time
Protocol (NTP) to obtain the current time from a Network Time Servers on the Internet that
you specify in the Basic Settings screen (see
“Configuring Basic System Settings” on
116


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WG102-500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WG102-500 in the language / languages: English as an attachment in your email.

The manual is 3,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear WG102-500

Netgear WG102-500 Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info