710462
11
Zoom out
Zoom in
Previous page
1/155
Next page
Back Panel
The back panel of the access point provides two ports and a DC power connector.
Figure 2. Access point back panel
Viewed from left to right, the back panel contains the following components:
LAN port. One black Gigabit Ethernet RJ-45 LAN port to connect the access point to Ethernet devices.
You can use the LAN port to connect the access point to a switch, computer, or other Ethernet device.
WAN PoE port. One yellow Gigabit Ethernet RJ-45 WAN PoE port that provides a connection to a PoE
switch or regular switch that is connected to your network and the Internet, for example, through an
Internet modem. If the access point functions in Router mode (see Change the System Mode to Router
Mode or AP Mode on page 106), you can connect the WAN PoE port directly to the LAN port of an Internet
modem.
DC power connector. If you do not use a PoE connection, connect an optional power adapter to the
DC power connector.
The Reset button is located on the left side panel of the access point. Press the Reset
button for about 2 seconds to reboot the access point or for more than 10 seconds
to reset the access point to factory default settings. If you added the access point to
a network on the Insight app before, you must first use the NETGEAR Insight app to
remove the access point from your network before the factory default settings function
of the Reset button is available. For more information, see Use the Reset Button on
page 118.
Note
For more information about WAN PoE and LAN port connections, see Set Up and Connect the Access
Point to Your Network or Internet Modem on page 15.
Hardware Overview of the Access Point
11
Insight Managed Smart Cloud Wireless Access Point WAC510 User Manual
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WAC510 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WAC510 in the language / languages: English as an attachment in your email.

The manual is 1,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info