710462
10
Zoom out
Zoom in
Previous page
1/155
Next page
Table 1. LED descriptions
DescriptionLED
Off. No power is supplied to the access point.
Solid green. Power is supplied to the access point and the access point is ready.
Solid amber. During startup, the Power LED lights solid amber. If after five minutes the amber
light remains on, a boot error occurred.
Blinking amber temporarily.The access point is upgrading firmware.
Blinking amber continuously.The access point did not receive an IP address from a DHCP
server.
Alternating green and amber.The access point is receiving insufficient PoE power.
Power LED
Off. No link with the network is detected.
Solid green. A link with the network is detected.
Blinking green. Network traffic is detected.
Activity LED
Off. Either no powered-on Ethernet device is connected to the WAN PoE port, or, if a powered-on
Ethernet device is connected, no Ethernet link is detected.
Solid amber. A 10 or 100 Mbps Ethernet link is detected on the WAN PoE port.
Solid green. A 1000 Mbps Ethernet link is detected on the WAN PoE port.
WAN PoE LED
Off. Either no powered-on Ethernet device is connected to the LAN port, or, if a powered-on Ethernet
device is connected, no Ethernet link is detected.
Solid amber. A 10 or 100 Mbps Ethernet link is detected on the LAN port.
Solid green. A 1000 Mbps Ethernet link is detected on the LAN port.
LAN LED
Off.The 2.4 GHz WiFi radio is off.
Solid green.The 2.4 GHz WiFi radio is on.
Solid blue. One or more WLAN clients are connected to the 2.4 GHz WiFi radio.
Blinking blue.Traffic is detected on the 2.4 GHz WiFi radio.
2.4G WLAN LED
Off.The 5 GHz WiFi radio is off.
Solid green.The 5 GHz WiFi radio is on.
Solid blue. One or more WLAN clients are connected to the 5 GHz WiFi radio.
Blinking blue.Traffic is detected on the 5 GHz WiFi radio.
5G WLAN LED
For information about troubleshooting with the LEDs, see Troubleshoot With the LEDs
on page 142.
Note
Hardware Overview of the Access Point
10
Insight Managed Smart Cloud Wireless Access Point WAC510 User Manual
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WAC510 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WAC510 in the language / languages: English as an attachment in your email.

The manual is 1,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info