710463
111
Zoom out
Zoom in
Previous page
1/149
Next page
Cloud Portal to remove the access point from the Insight network location before the factory default settings
function of the Reset button is available.
CAUTION:
This process erases all settings that you configured in the access point.
To reset the access point to factory default settings:
1. On the back panel of the access point, locate the recessed Reset button to the right of the LAN port.
2. Using a straightened paper clip, press and hold the Reset button for at least 10 seconds.
If you hold the Reset button for less than 10 seconds and then release it, the access
point reboots rather than returning to its factory default settings.
Note
3. Release the Reset button.
The configuration is reset to factory default settings.When the reset is complete, the access point
reboots.This process takes about two minutes.
WARNING:
To avoid the risk of corrupting the firmware, do not interrupt the reset. For
example, if you are connected to the access point’s local browser interface,
do not close the browser, click a link, or load a new page. Do not turn off the
access point.Wait until the access point finishes restarting and the Power
LED turns solid green.
Manage and Maintain the Access Point
111
Insight Managed Smart Cloud Wireless Access Point WAC505 User Manual
111


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WAC505 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WAC505 in the language / languages: English as an attachment in your email.

The manual is 3,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info