710463
28
Zoom out
Zoom in
Previous page
1/149
Next page
(Continued)
DescriptionSetting
From the menu, select one of the following authentication types for the WiFi
network:
Open. Authentication is not required and data encryption is not supported.
This setting does not provide any security and is not appropriate for most
situations.
WPA2-PSK.This option allows only WiFi clients that support WPA2 to connect
to the SSID. Select this option if all WiFi clients are capable of supporting
WPA2. This option uses AES encryption.
WPA-PSK / WPA2-PSK.This option allows both WPA and WPA2 WiFi clients
to connect to the SSID.This option uses TKIP and AES encryption. Broadcast
packets use TKIP. For unicast (that is, point-to-point) transmissions, WPA
clients use TKIP and WPA2 clients use AES.
For information about setting up WPA2 Enterprise security, see
Set Up an Open or Secure WiFi Network on page 31.
Note
Authentication Type
Unless you select Open from the Authentication Type menu, enter a new
passphrase (network key or WiFi password) for the WiFi network.
Passphrase
8. Click the Apply button.
Your settings are saved and you are disconnected from the access point.
If you changed the default country, the access point restarts.
9. After a few minutes, if the login window does not open automatically, enter 192.168.0.100 in the address
bar of your browser.
If you changed the IP address (that is, you specified a static IP address), enter the new IP address.
A login window opens.
10. Enter the access point user name and password.
The default user name is admin. The password is the one that you just defined on the Day Zero Easy
Setup page.The user name and password are case-sensitive.
The Dashboard page displays.You can now customize the access point settings for your network
environment.
11. After you complete the setup process, or both the setup and customization process, you can change
the computer back to its original IP address settings.
Install the Access Point in Your Network and Access It for Initial Configuration
28
Insight Managed Smart Cloud Wireless Access Point WAC505 User Manual
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WAC505 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WAC505 in the language / languages: English as an attachment in your email.

The manual is 3,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info