710463
11
Zoom out
Zoom in
Previous page
1/149
Next page
Back Panel
The back panel of the access point provides the DC power connector, LAN port, and Reset button.
Figure 2. Access point back panel
Viewed from left to right, the back panel contains the following components:
DC power connector. If you do not use a PoE connection, connect an optional power adapter to the
DC power connector.
LAN port. One Gigabit Ethernet RJ-45 LAN port that supports PoE. Use the LAN port to connect the
access point to a switch or PoE switch that is connected to a network router, which, in turn, must be
connected to the Internet, for example, through an Internet modem.You can also use the LAN port to
connect the access point to a computer for initial configuration.
Reset button. Press the Reset button for about 2 seconds to reboot the access point or for more than
10 seconds to reset the access point to factory default settings. If you added the access point to a
NETGEAR Insight network location, you must first use the Insight mobile app or Insight Cloud Portal to
remove the access point from your Insight network location before the factory default settings function
of the Reset button is available. For more information, see Use the Reset Button on page 110.
For more information about the LAN port connection, see Set Up and Connect the Access Point to Your
Network on page 15.
Hardware Overview of the Access Point
11
Insight Managed Smart Cloud Wireless Access Point WAC505 User Manual
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WAC505 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WAC505 in the language / languages: English as an attachment in your email.

The manual is 3,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info