710464
42
Zoom out
Zoom in
Previous page
1/79
Next page
WARNING:
To avoid the risk of corrupting the firmware, do not interrupt the update. For
example, do not close the browser, click a link, or load a new page. Do not
turn off the access point.Wait until the access point finishes restarting and
the Power LED remains solid green.
A progress bar shows the progress of the firmware upload process.The firmware upload process takes
several minutes. When the upload is complete, the access point restarts.
9. Verify that the access point runs the new firmware version by doing the following:
a. Open a web browser from the computer that is connected to the same network as the access point
or to the access point directly through an Ethernet cable or WiFi connection.
b. Enter the IP address that is assigned to the access point.
A login window opens.
c. Enter the access point user name and password.
The Home page displays.The firmware version is stated in the Firmware Version field of the AP
Information panel.
Manage the Configuration File of the Access Point
The configuration settings of the access point are stored within the access point in a configuration file.You
can back up (save) this file to your computer or restore it.
Back Up the Settings
You can save a copy of the current configuration settings. If necessary, you can restore the configuration
settings later.
To back up the access point’s configuration settings:
1. Open a web browser from a computer that is connected to the same network as the access point or to
the access point directly through an Ethernet cable or WiFi connection.
2. Enter the IP address that is assigned to the access point.
If you did not enable the DHCP client on the access point or did not assign a static IP address, enter
the default access point IP address 192.168.0.100.
A login window opens.
3. Enter the access point user name and password.
The user name is admin.The default password is password.The user name and password are
case-sensitive.
The Home page displays.
4. Select Administration > Backup Settings.
The Backup Settings page displays.
Manage the Access Point and Monitor the Traffic
42
802.11ac Wireless Access
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WAC104 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WAC104 in the language / languages: English as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info