710464
37
Zoom out
Zoom in
Previous page
1/79
Next page
Does your WiFi device display as an attached device? (See View Devices Currently on the Network
on page 48.) If it does, it is connected to the network.
Are you using the correct network name (SSID) and password?
Control the WiFi Radios
The access point provides internal WiFi radios that broadcast signals in the 2.4 GHz and 5 GHz bands. By
default, they are on so that you can connect over WiFi to the access point. When the WiFi radios are off,
you can still use an Ethernet cable for a LAN connection to the access point.
You can turn the WiFi radios on and off with the WiFi On/Off button on the access point, or you can log in
to the access point and enable or disable the WiFi radios through the access point web management
interface. If you are close to the access point, it might be easier to press the WiFi On/Off button. If you are
away from the access point or already logged in, it might be easier to enable or disable the radios through
the access point web management interface.You can also turn the WiFi radios off and on based on a
schedule. (See Add a WiFi Schedule on page 57.)
Use the WiFi On/Off Button
To turn the WiFi radios off and on with the WiFi On/Off button:
Press the WiFi On/Off button on the rear panel of the access point for two seconds.
If you turned off the WiFi radios, the WiFi LED turns off. If you turned on the WiFi radios, the WiFi LED
lights solid green.
If you want to disable the WiFi radio or radios of the access point, use a wired connection
to avoid being disconnected when WiFi radio or radios turn off.
Tip
Enable or Disable the WiFi Radios
If you used the WiFi On/Off button to turn off the WiFi radios, you cannot log in to the access point over a
WiFi connection to turn them back on.You must press the WiFi On/Off button again for two seconds to turn
the WiFi radios back on.
To enable or disable the WiFi radios:
1. Open a web browser from a computer that is connected to the same network as the access point or to
the access point directly through an Ethernet cable or WiFi connection.
2. Enter the IP address that is assigned to the access point.
If you did not enable the DHCP client on the access point or did not assign a static IP address, enter
the default access point IP address 192.168.0.100.
A login window opens.
3. Enter the access point user name and password.
The user name is admin.The default password is password.The user name and password are
case-sensitive.
The Home page displays.
Manage the Basic WiFi Network Settings
37
802.11ac Wireless Access
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WAC104 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WAC104 in the language / languages: English as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info