710464
29
Zoom out
Zoom in
Previous page
1/79
Next page
(Continued)
DescriptionField
From the Channel menu, select Auto for automatic channel selection or select an individual
channel.The default selection is Auto.
In some regions, not all channels are available. Do not change the channel
unless you experience interference (shown by lost connections or slow data
transfers). If this situation occurs, experiment with different channels to see
which is the best.
Note
If you use multiple WiFi access points (APs), reduce interference by selecting
different channels for adjacent APs.We recommend a channel spacing of
four channels between adjacent APs (for example, use Channels 1 and 5,
or 6 and 10).
Note
Channel
From the Mode menu, select one of the following modes:
Up to 54 Mbps. Legacy mode.This mode allows 802.11n, 802.11g, and 802.11b devices
to join the network but limits 802.11n devices to functioning at up to 54 Mbps.
Up to 145 Mbps. Neighbor-friendly mode for reduced interference with neighboring WiFi
networks.This mode allows 802.11n, 802.11g, and 802.11b devices to join the network
but limits 802.11n devices to functioning at up to 145 Mbps.
Up to 300 Mbps. Performance mode.This mode allows 802.11n, 802.11g, and 802.11b
devices to join the network and allows 802.11n devices to function at up to 300 Mbps.This
mode is the default mode.
WPA-PSK security and WEP security support speeds of up to 54 Mbps.
Even if your devices are capable of a higher speed, WPA-PSK security
and WEP security limit their speed to 54 Mbps.
Note
Mode
By default, the access point broadcasts its SSID so that WiFi stations can detect the WiFi name
(SSID) in their scanned network lists.To turn off the SSID broadcast, clear the Enable SSID
Broadcast check box.Turning off the SSID broadcast provides additional WiFi security, but
users must know the SSID to be able to join the WiFi network of the access point.
If you set up a WiFi Distribution System (WDS, see Set Up a WiFi Distribution
System on page 63), you must keep the SSID broadcast enabled.
Note
Enable SSID
Broadcast
By default, 20/40 MHz coexistence is enabled to prevent interference between WiFi networks
in your environment at the expense of the WiFi speed. If no other WiFi networks are present
in your environment, you can clear the Enable 20/40 MHz Coexistence check box to increase
the WiFi speed to the maximum supported speed.The 20/40 MHz coexistence setting applies
to the 2.4 GHz band only.
Enable 20/40
MHz Coexistence
Manage the Basic WiFi Network Settings
29
802.11ac Wireless Access
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WAC104 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WAC104 in the language / languages: English as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info