710464
23
Zoom out
Zoom in
Previous page
1/79
Next page
5. From the menu, select the time zone for the area in which the access point operates.
6. If the access point is in an area that observes daylight saving time, select the Automatically adjust for
Daylight Savings Time check box.
7. Click the Apply button.
Your settings are saved. When the access point connects over the Internet to an NTP server, the date
and time that display on the page are adjusted according to your settings.
Connect to the Access Point’s Network After Installation
After you install the access point in your network, you can connect to the access point’s LAN through a wired
connection or to the access point’s WiFi network over a WiFi connection.
If you set up your computer to use a static IP address, change the settings of your computer so that it uses
Dynamic Host Configuration Protocol (DHCP), which enables the computer to receive an IP address from
the router or network to which the access point is connected.
Connect to the Access Point Through an Ethernet Cable
You can connect your computer to the access point using an Ethernet cable and join the access point’s
local area network (LAN).
For information about logging in to the access point web management interface, see Log In to the Access
Point After Setup to View or Change Settings on page 19.
To connect your computer to the access point with an Ethernet cable:
1. Make sure that the access point is receiving power (its Power LED is lit).
2. Connect an Ethernet cable to an Ethernet port on your computer.
3. Connect the other end of the Ethernet cable to one of the numbered Ethernet ports on the access point.
You can use any of the four LAN ports on the access point.
Your computer connects to the local area network (LAN). A message might display on your computer
screen to notify you that an Ethernet cable is connected.
Join the WiFi Network of the Access Point
Choose either the manual or the WPS method to add a WiFi device such as a WiFi-enabled computer, an
iPhone, an iPad, or another mobile device to the WiFi network of the access point.
For information about logging in to the access point web management interface, see Log In to the Access
Point After Setup to View or Change Settings on page 19.
Manual Method
On the WiFi device that you want to connect to the access point, you can use the software application that
manages your WiFi connections.
Install and Access the Access Point in Your Network
23
802.11ac Wireless Access
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WAC104 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WAC104 in the language / languages: English as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info