710464
13
Zoom out
Zoom in
Previous page
1/79
Next page
To connect the access point to a router and log in to the access point:
1. Connect the Ethernet cable that came in the package to one of the access point’s Ethernet ports.
You can use any of the four LAN ports on the access point.
2. Connect the other end of the cable to a LAN port on your router.
3. Power on the access point.
The Power LED lights solid green. If the Power LED does not light, press the Power On/Off button.
Wait for the WiFi LED to light solid green. If the WiFi LED does not light, press the WiFi On/Off
button.
For the next step, you can use WiFi to connect your WiFi device to the access point or you can use a
computer and an Ethernet cable to connect to a LAN port on the access point.
4. Connect to the access point by doing one of the following:
Connect your WiFi device to the access point by using one of the WiFi network names (SSIDs) on
the product label. A network key or password is not required.
For more information, see Join the WiFi Network of the Access Point on page 23.
Connect a computer to a LAN port on the access point by doing the following:
a. Record the IP address and subnet mask of your computer so that you can reinstate these IP
address settings when you complete the configuration of the access point.
b. Temporarily change the IP address on your computer to 192.168.0.210 with 255.255.255.0 as
the subnet mask.
(You can actually use any IP address in the 192.168.0.2–192.168.0.254 range, with the exception
of IP address 192.168.0.100, which is the default access point IP address.)
For more information about changing the IP address on your computer, see the help or
documentation for your computer.
c. Use another Ethernet cable (not provided) to connect your computer to a LAN port on the access
point.
5. To customize the features of the access point, log in to the access point by doing the following:
a. Open a web browser from the computer that is connected to the access point.
b. Enter 192.168.0.100 in the address field of the web browser.
Because the DHCP client of the access point is disabled by default, the access point does not
receive an IP address from the router’s DHCP server and you must the default IP address of the
access point.
c. When prompted, enter admin for the user name and password for the password.
The access point’ web management interface displays.
6. Change the settings as needed.
For more information, see the sections in this manual.
Install and Access the Access Point in Your Network
13
802.11ac Wireless Access
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WAC104 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WAC104 in the language / languages: English as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info