681101
2
Zoom out
Zoom in
Previous page
1/2
Next page
Orbi Pro Ceiling Satellite Overview
Power LED on the top panel
LED bar on the top panel
DC power connector
PoE+ LAN 1 port
LAN 2 port
Reset button
Sync button
2
1
3
4
5
6
1
3 4
6
5
Manually Sync Your Satellite Before You Install It
Place your Orbi Pro router and Orbi satellite near each other during the syncing process. After your router and satellite are synced, mount
the satellite.
1. Place your Orbi satellite in an area near your Orbi Pro router.
2. Connect your satellite to a power source.
Either connect the power adapter to the satellite and to a power source or connect PoE+ LAN port 1 on the satellite to an Ethernet
cable and to a Power over Ethernet Plus (PoE+) switch that can provide 802.3at (PoE+) power.
The Power LED on the top panel of the Orbi satellite lights solid green.
Note: If the Power LED does not light, check the power source or the PoE+ switch. If the Power LED lights red, the power is not at the
required 802.3at (PoE+) level. Make sure that you use an 802.3at (PoE+) switch and not an 802.af (PoE) switch. For more information
about the Power LED, see the user manual, which you can download by visiting https://www.netgear.com/support/download/.
3. Wait for the LED bar (next to the Power LED) to light solid white.
The following is the LED bar behavior during booting:
Pulsing white. The satellite is booting.
Solid white. The satellite nished booting and is ready to sync with your router.
4. Press the Sync button on the back of your satellite, and within two minutes, press the Sync button on the back of your Orbi Pro router.
5. Wait for the satellite to sync with the router.
The LED bar on the satellite lights pulsing white while it attempts to sync with your Orbi Pro router. It might take about six minutes for
your satellite to sync.
After the LED bar lights pulsing white, it lights one of the following colors for about three minutes and then turns off:
6. Mount your satellite and connect it to a power source.
You can mount your satellite on a ceiling or on a wall. For more information, see Mount the Satellite on a Drop Ceiling or Mount the
Satellite on a Wall on the other side of this quick start guide.
Either connect the power adapter to the satellite and to a power source or connect PoE+ LAN port 1 on the satellite to an Ethernet
cable and to a PoE+ switch that can provide 802.3at (PoE+) power.
7. Make sure that the LED bar lights blue to indicate a good connection to the Orbi router.
Note: After your satellite syncs with your router, the satellite’s Sync button is disabled for security reasons. If you press the Sync button
and the satellite’s LED bar pulses magenta, this LED behavior indicates that the Sync button is disabled. To enable the Sync button, log
in to the router and go to the Attached Devices page. For more information, see the user manual.
Blue
The Orbi Pro router and satellite successfully synced, and the connection between the router and satellite is good.
Amber
The Orbi Pro router and satellite successfully synced, and the connection between the router and satellite is fair. Consider moving
the satellite closer to the router.
Magenta
The Orbi Pro router and satellite did not sync. Move the satellite closer to the router and try again.
Support
Thank you for purchasing this NETGEAR product. You can visit
https://www.netgear.com/support/ to register your product, get
help, access the latest downloads and user manuals, and join our
community. We recommend that you use only ofcial NETGEAR
support resources.
Si ce produit est vendu au Canada, vous pouvez accéder à ce
document en français canadien à
https://www.netgear.com/support/download/.
(If this product is sold in Canada, you can access this document
in Canadian French at
https://www.netgear.com/support/download/.)
For regulatory compliance information including the EU
Declaration of Conformity, visit
https://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the
power supply.
NETGEAR INTL LTD
Building 3, University Technology
Centre
Curraheen Road, Cork, Ireland
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
© NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of
NETGEAR, Inc. Any non-NETGEAR trademarks are used for reference purposes
only.
December 2018
Sync your Orbi Satellite With the
NETGEAR Insight App
You can use the NETGEAR Insight app to sync your Orbi satellite
with your Orbi Pro router. For more information about the app,
visit https://www.netgear.com/insight/.
1. Download the NETGEAR Insight app from the Apple App
Store or Google Play Store.
2. Launch the NETGEAR Insight app on your mobile device and
follow the prompts.
Note: If you don’t own a mobile device, follow the instructions
in Manually Sync Your Satellite Before You Install It.
7
2
7
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear SRC60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear SRC60 in the language / languages: English as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear SRC60

Netgear SRC60 Quick start guide - German - 2 pages

Netgear SRC60 Quick start guide - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info