710477
13
Zoom out
Zoom in
Previous page
1/184
Next page
In addition to the three antenna connectors, viewed from left to right, the rear panel
contains the following components:
Reset button. Pressing the Reset button resets the router. If you press the Reset
button for at least 10 seconds, the Power LED blinks amber and the router returns
to its factory settings.
LAN ports. Four Gigabit Ethernet RJ-45 LAN ports to connect the router to LAN
devices.
Internet port. One Gigabit Ethernet RJ-45 WAN port to connect the router to an
Internet modem such as a cable modem or DSL modem.
USB 2.0 port. One USB 2.0 port to connect the router to a USB storage device that
does not require a USB 3.0 connection.
Note: The USB 3.0 port is on the front panel. You can use the USB 3.0 port to connect
the router to a USB storage device.
Power On/Off button. Press the Power On/Off button to provide power to the
router.
DC power connector. Connect the power adapter that came with your router to
the DC power connector.
Router label and QR Code label
The router label on the bottom panel lists the login information, WiFi network name
(SSID) and password (network key), serial number, and MAC address of the router.
Figure 3. Router label
User Manual13Hardware Setup
Nighthawk AC2300 Cybersecurity WiFi Router Model RS400
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear RS400 Cyber Security Router at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear RS400 Cyber Security Router in the language / languages: English as an attachment in your email.

The manual is 3,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info