544205
83
Zoom out
Zoom in
Previous page
1/107
Next page
Disks
83
ReadyNAS OS 6 Desktop Storage Systems
For 6-bay systems, insert the disk tray so that the disk tray release latch is on the left
side of the system.
9. Press down on the disk tray handle until it latches closed.
The disk tray is secured in the drive bay.
10. If necessary, turn on your system by pressing the Power button.
If the disk that you added was not previously formatted, the system uses the disk in one
of the following ways:
If you are adding the disk to a system that uses X-RAID2, the system automatically
determines whether the disk is used for protection or storage. The new disk is
incorporated in the background while you continue to use your system.
If you are adding the disk to a system that uses Flex-RAID, the disk becomes
available for use. You use the local admin page to manually configure the new disk.
For more information about X-RAID2, Flex-RAID, and using the local admin page, see
the ReadyNAS OS 6 Software Manual, which is available at
http://support.netgear.com/product/ReadyNAS-OS6.
Replace a Disk
If your volumes use a protected RAID configuration, your system can recover from the failure
of a disk. When you replace the failed disk, the system rebuilds the volume using the new
disk and no data from the volume is lost.
The Disk LEDs can help you identify a failed disk. For more information, see the Status
Information section of the chapter that describes your system. You can also use the local
admin page to set up email alerts that notify you when a disk fails. In addition, the local admin
page provides information about the failed disk.
For information about RAID configurations, setting up email alerts, and using the local admin
page, see the ReadyNAS OS 6 Software Manual, which is available at
http://support.netgear.com/product/ReadyNAS-OS6.
ReadyNAS supports hot-swap drive bays, so you do not need to power down your storage
system when replacing a disk.
If you are replacing a disk with a previously formatted disk, see the instructions in Previously
Formatted Disks on page 74.
WARNING:
Replace one disk at a time. Wait for the volume to resynchronize
your data before replacing another disk. If you attempt to replace
more than one disk at a time, the system will crash.
83


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear RN10200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear RN10200 in the language / languages: English as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info