516552
67
Zoom out
Zoom in
Previous page
1/97
Next page
Disks
67
ReadyNAS OS 6 Desktop Storage Systems
2. Install the disk.
For more information, see Add a Disk on page 68.
3. Reset the system to its factory default settings.
WARNING:
This process erases all data and reformats all disks into a single
X-RAID2 volume. If you want to preserve the data on the disks,
you must back up the data to an external drive before using the
disks in your ReadyNAS storage system.
For information about how to reset the system to its factory default settings, see the Boot
Menu section of the chapter that describes your system.
The disk is reformatted and becomes available for use with your ReadyNAS OS 6
storage system.
Migrate a Volume
You can migrate a volume from one ReadyNAS OS 6 storage system to another, as long as
you migrate every disk in the volume. For example, if you want to migrate a volume that
contains two disks, you must add both disks to the new system. If you add only part of a
volume to the new system, the system recognizes the disk as a degraded volume.
If your ReadyNAS storage system is operating with one or more disks, you can add disks
while the system is running. The new system recognizes the migrated volume and its data.
For more information about adding a disk while the system is running, see
Add a Disk on
page 68.
If your ReadyNAS storage system does not have any disks installed, perform the following
procedure.
To migrate a volume to a diskless ReadyNAS OS 6 system:
1. Gracefully shut down the new (diskless) storage system.
For information about how to gracefully shut down your system, see the Preferred
Shutdown section of the chapter that describes your system.
2. Remove each disk in the volume from the old system.
3. Install each disk in the volume into the new storage system.
For more information, see Add a Disk on page 68.
4. Turn on the new system by pressing the Power button.
The new system recognizes the migrated volume and its data.
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear ReadyNAS 516 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear ReadyNAS 516 in the language / languages: English as an attachment in your email.

The manual is 2,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info