516552
62
Zoom out
Zoom in
Previous page
1/97
Next page
NETGEAR EDA 500
62
ReadyNAS OS 6 Desktop Storage Systems
Power On and Shut Down
This section describes how to power on and shut down your system. If you need to shut down
the system, use the preferred shutdown method whenever possible.
Power On
When the system is connected to a power supply and the Power switch is in the On position,
the system automatically powers on.
When connected to a host that is powered on, the EDA 500 automatically powers on. The
EDA 500 detects a powered-on host through the E-SATA link.
You can also power on the system by pressing the Power button on the front panel of the
system.
Preferred Shutdown
If possible, always unmount the EDA 500 volumes from the host before shutting down the
EDA 500.
Use the ReadyNAS local admin page to gracefully shut down the EDA 500. For information
about how to gracefully shut down the EDA 500 using the ReadyNAS local admin page, see
the ReadyNAS OS 6 Software Manual, which is available at
http://support.netgear.com/product/ReadyNAS-OS6.
Forced Shutdown
Perform a forced shutdown only if the storage system is not responding.
To perform a forced shutdown:
Flip the Power switch on the back panel of the system to the Off position.
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear ReadyNAS 516 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear ReadyNAS 516 in the language / languages: English as an attachment in your email.

The manual is 2,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info