681121
10
Zoom out
Zoom in
Previous page
1/170
Next page
Table 1. LED and button descriptions
LED Description
Power
Solid amber. The router is starting.
Blinking amber. The
firmware is upgrading, or the Reset button was pressed.
Solid white. The
router is ready.
Blinking white. The
firmware is corrupted.
Off. Power is not supplied to the router.
Internet
Solid white. The Internet connection is ready.
Solid amber.
The router detected an Ethernet cable connection to the modem.
Off. No Ethernet cable is connected between the router and the modem.
2.4 GHz WiFi
Solid white. The 2.4 GHz WiFi radio is operating.
Blinking. The
router is sending or receiving WiFi traffic.
Off.
The 2.4 GHz WiFi radio is off.
5 GHz WiFi
Solid white. The 5 GHz WiFi radio is operating.
Blinking. The
router is sending or receiving WiFi traffic.
Off. The
5 GHz WiFi radio is off.
USB 3.0 port 1
and USB 3.0
port 2
Solid white. A USB device is connected and is ready.
Blinking.
A USB device is plugged in and is trying to connect.
Off. No USB device is connected, or someone clicked the Safely Remove Hardware
button and it is now safe to remove the attached USB device.
eSATA
Solid white. An eSATA device is connected and is ready.
Blinking.
An eSATA device is plugged in and is trying to connect.
Off. No eSA
TA device is connected.
Ethernet ports
1–4
The LED color indicates the speed: white for Gigabit Ethernet connections and amber for 100
Mbps or 10 Mbps Ethernet connections.
Solid.
A powered-on device is connected to the Ethernet port.
Blinking.
The port is sending or receiving traffic.
Off. No device is connected to this Ethernet port.
WiFi On/Off
button with LED
Pressing this button for two seconds turns the 2.4 GHz and 5 GHz WiFi radios on and off.
If this LED is lit, the WiFi radios are on. If this LED is off, the WiFi radios are turned off and you
cannot use WiFi to connect to the router.
WPS button with
LED
This button lets you use WPS to join the WiFi network without typing the WiFi password. The
WPS LED blinks white during this process and then lights solid white.
Hardware Setup
10
Nighthawk X4 AC2350 Smart WiFi Router
You can use the LED On/Off switch on the rear panel of the router to turn the LEDs on the
top of the router on or off. See Turn the LEDs On or Off Using the LED On/Off Switch on
page 11.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear R7500 Nighthawk X4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear R7500 Nighthawk X4 in the language / languages: English as an attachment in your email.

The manual is 10,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear R7500 Nighthawk X4

Netgear R7500 Nighthawk X4 Quick start guide - German - 22 pages

Netgear R7500 Nighthawk X4 Quick start guide - Dutch - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info