681120
250
Zoom out
Zoom in
Previous page
1/266
Next page
DST Router Troubleshooting
250
Nighthawk DST AC1900 DST Router and DST Adpater Model R7300DST
Power LED Stays Amber
When the DST router is turned on, the Power LED turns amber for about 20 seconds and
then turns white. If the LED does not turn white, this indicates a problem with the DST router.
If the Power LED is still amber one minute after you turn on power to the DST router, do the
following:
1. Turn off the power and then turn it back on to see if the DST router recovers.
2. Press and hold the Reset button to return the DST router to its factory settings.
See Troubleshoot Your Network Using the Ping Utility on page 254.
If the error persists, a hardware problem might be the cause. Contact technical support at
www.netgear.com/support.
LEDs Never Turn Off
When the DST router is turned on, the LEDs light for about 10 seconds and then turn off. If all
the LEDs stay on, this indicates a fault within the DST router.
If all LEDs are still lit one minute after power-up, do the following:
Cycle the power to see if the DST router recovers.
Press and hold the Reset button to return the DST router to its factory settings. For more
information, see
Troubleshoot Your Network Using the Ping Utility on page 254.
If the error persists, you might have a hardware problem. Contact technical support at
www.netgear.com/support.
Internet or Ethernet Port LEDs Are Off
If either the Ethernet port LEDs or the Internet LED does not light when the Ethernet
connection is made, check the following:
Make sure that the Ethernet cable connections are secure at the DST router and at the
modem or computer.
Make sure that power is turned on to the connected modem or computer.
Be sure that you are using the correct cable.
When connecting the DST router’s Internet port to a cable or DSL modem, use the cable
that was supplied with the cable or DSL modem. This cable can be a standard
straight-through Ethernet cable or an Ethernet crossover cable.
Cannot Log In to the DST Router
If you are unable to log in to the DST router from a computer on your local network, check the
following:
250


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear R7300DST Nighthawk at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear R7300DST Nighthawk in the language / languages: English as an attachment in your email.

The manual is 13,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info