670489
186
Zoom out
Zoom in
Previous page
1/196
Next page
Troubleshooting
186
Nighthawk AC1900 Smart WiFi Router
Troubleshoot with the LEDs
By default, the router is set with standard LED settings. If you disabled blinking for the LEDs
or turned off all LEDs except the Power LED, you must return the LEDs to their standard
settings for troubleshooting. For information about controlling the LED settings, see Disable
LED Blinking or Turn off LEDs on page 117.
Standard LED Behavior When the Router is Powered On
After you turn on power to the router, the following sequence of events occurs:
1. When power is first applied, verify that the Power LED
is lit.
2. After approximately 30 seconds, verify the following:
The Power LED is solid white.
The Internet LED is lit.
The WiFi LED is lit unless you turned off the wireless radio.
You can use the LEDs on the front panel of the router for troubleshooting.
Power LED Is Off or Blinking
Make sure that the power adapter is securely connected to your router and securely
connected to a working power outlet.
Check that you are using the power adapter that NETGEAR supplied for this product.
If the Power LED blinks slowly and continuously
, the router firmware is corrupted. This
can happen if a firmware upgrade is interrupted, or if the router detects a problem with the
firmware. If the error persists, you have a hardware problem. For recovery instructions, or
help with a hardware problem, contact technical support at www.netgear.com/support.
Power LED Stays Amber
When the router is turned on, the Power LED turns amber for about 20 seconds and then
turns white. If the LED does not turn white, the router has a problem.
If the Power LED is still amber one minute after you turn on power to the router, do the
following:
1. Turn off the power and then turn it back on to see if the router recovers.
2. Press and hold the Reset button to return the router to its factory settings.
See Troubleshoot Your Network Using the Ping Utility on page 191.
If the error persists, you might have a hardware problem. Contact technical support at
www.netgear.com/support.
186


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear R7000 - Nighthawk at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear R7000 - Nighthawk in the language / languages: English as an attachment in your email.

The manual is 9,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear R7000 - Nighthawk

Netgear R7000 - Nighthawk Quick start guide - English - 22 pages

Netgear R7000 - Nighthawk Quick start guide - German - 22 pages

Netgear R7000 - Nighthawk User Manual - German - 210 pages

Netgear R7000 - Nighthawk Quick start guide - Dutch - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info