710568

Netgear R6260 Manual

141
Zoom out
Zoom in
Previous page
1/177
Next page
By default, the device name is the router model. If you set up the router as a WiFi bridge and you want
to distinguish it from the name of the router that is connected to the Internet modem, you could, for
example, change the name to WiFi bridge or something similar.
12. To let the router that functions as the WiFi bridge get an IP address and DNS addresses dynamically
from the router that is connected to the Internet modem, leave the Get IP Address Dynamically and
Get DNS Server Address Dynamically check boxes selected.
We recommend that you leave the Get IP Address Dynamically and Get DNS Server Address
Dynamically check boxes selected. However, if you are sure that you must use a static IP address, us
an IP address from the LAN IP address pool of the router that is connected to the Internet modem. To
specify a static IP address for the router that functions as the WiFi bridge, do the following:
a. Clear the Get IP Address Dynamically check box.
The Get DNS Server Address Dynamically check box is automatically cleared.
b. Enter all static IP address information and, if applicable, static DNS address information.
13. Click the Apply button.
Your settings are saved.The router restarts with a new IP address.
14. To reconnect, close your browser, relaunch it, and log in to the router by entering
http://www.routerlogin.net.
When the router functions as a WiFi bridge, you cannot change its WiFi settings, that is, the settings on
the Wireless Network page (BASIC > Wireless) are masked out. However, if you want to reverse the
configuration, you can disable the WiFi bridge option (that is, clear the use other operation mode
check box) on the Advanced Wireless Settings page (ADVANCED > Advanced Setup > Advanced
Wireless Settings).
Use the Router as a WiFi Access Point Only
By default, the router functions as both a router and a WiFi access point (AP).You can set up the router to
function as an access point only and let it operate in the same local network as another router. When the
router functions as an access point only, many of its router-related features are disabled.
If you want to change the router’s function, use a wired connection to avoid being
disconnected when the new function takes effect.
Tip
To change the router to access point mode only:
1. Use an Ethernet cable to connect the yellow Internet port on the rear panel of the router to a LAN port
on the other router.
2. Launch a web browser from a computer or mobile device that is connected to the router network.
3. Enter http://www.routerlogin.net.
A login window opens.
4. Enter the router user name and password.
The user name is admin.The password is the one that you specified the first time that you logged in.
The user name and password are case-sensitive.
Manage the Advanced WiFi Features
141
AC1600 Smart WiFi Router Model R6260
… 141 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear R6260 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear R6260 in the language / languages: English as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info