670473
128
Zoom out
Zoom in
Previous page
1/140
Next page
WiFi Settings
Make sure that the WiFi settings in the computer or mobile device and router match exactly. The WiFi
network name (SSID) and WiFi security settings of the router and computer or mobile device must match
exactly.
If you set up an access control list, you must add the MAC address of each computer or mobile device to
the router’s access control list (see Allow or Block Access to Your Network on page 39).
Network Settings
Make sure that the network settings of the computer are correct.Wired computers and computers or mobile
devices that are connected over WiFi must use network IP addresses on the same network as the router.
The simplest way to do this is to configure each computer to obtain an IP address automatically using DHCP.
Some service providers require you to use the MAC address of the computer initially registered on the
account, but this is an uncommon situation.You can view the MAC address on the Attached Devices page
(see View Devices Currently on the Network on page 108).
Troubleshoot With the LEDs
By default, the router is set with standard LED settings.
Standard LED Behavior When the Router Is Powered On
After you turn on power to the router, verify that the following sequence of events occurs:
1. When power is first applied, verify that the Power LED is lit.
2. After about two minutes, verify the following:
The Power LED is lit.
The Internet LED is lit.
The WiFi LED is lit unless you turned off the WiFi radios.
You can use the LEDs on the front panel of the router for troubleshooting.
Power LED Is Off or Blinking
This could occur for a number of reasons. Check the following:
Make sure that the power adapter is securely connected to your router and securely connected to a
working power outlet.
Make sure that you are using the power adapter that NETGEAR supplied for this product.
If the Power LED blinks slowly and continuously, the router firmware might be corrupted.This can
happen if a firmware upgrade is interrupted, or if the router detects a problem with the firmware. If the
error persists, it is likely that a hardware problem exists. For recovery instructions or help with a hardware
problem, contact technical support at netgear.com/support.
Troubleshooting
128
AC1200 WiFi Router Model R6120
128


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear R6120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear R6120 in the language / languages: English as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear R6120

Netgear R6120 Quick start guide - English - 2 pages

Netgear R6120 Quick start guide - German - 2 pages

Netgear R6120 User Manual - German - 188 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info