479736
8
Zoom out
Zoom in
Previous page
1/30
Next page
8 | Chapter 1. Getting Started
Push2TV HD TV Adapter for Intel® Wireless Display User Manual
After the scan is complete, any adapters in range are displayed in the Detected adapters
field. If your adapter is not detected, click the Scan for available adapters button. If your
adapter still does not appear, see the
There Are No Adapters Detected on page 20.
The Detected adapters headings are Type, Name, ID, Model, and Signal.
Type. If this is a first-time connection, the circle on the TV icon is gray. If the connection
has been used previously, the icon circle is orange.
Name. This refers to the adapter and is initially set by the adapter manufacturer. If this is
the initial setup, you can rename the adapter in a following step.
ID. If the default name has not been changed, use the ID to distinguish multiple entries
and find your adapter.
Model. This is the adapter manufacturer and product model name.
Signal. The number of bars represents signal strength. The scale ranges from one bar
(weakest signal) to five bars (strongest signal). The bars turn from green to yellow if the
signal strength falls below three bars.
Connecting to the Adapter
1. On the laptop, in the Detected adapter screen, click the adapter and then click the
Connect button. If more than one adapter is detected, use the ID to find the correct
adapter.
The laptop and TV screens both show Connecting...
Note: If the laptop status shows Connecting... and the TV screen shows
Ready for Connection, click the Cancel connect button and try
connecting again. If this does not work, the connection might be
blocked by a firewall. See Firewall Issues on page 21.
After the laptop connects to the adapter, the TV displays the message Connected.
Please wait. If this message is displayed more than 1 minute, the connection attempt
failed. Click the Disconnect button and try connecting again.
After a successful connection, the laptop and TV screen display the same images,
and your adapter is displayed in the Connected adapter field. You are now ready to
enjoy and share your favorite pictures, videos, and music.
2. If you want to move Intel Wireless Display out of the display area, use the minimize button
instead of the close button.
To disconnect from the adapter, click the Disconnect button.
See Setting Up Autoconnect on page 13 for information about automatically
connecting to an adapter after the first connection has been made.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear PTV2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear PTV2000 in the language / languages: English as an attachment in your email.

The manual is 0,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info