641095
287
Zoom out
Zoom in
Previous page
1/299
Next page
DSL/Internet LED Is Solid White
If the DSL/Internet LED lights solid white, the DSL, cable, or fiber connection is good.You can be confident that
the service provider connected your line correctly and that your wiring is correct.
DSL/Internet LED Is Blinking White (DSL Connection Only)
If the DSL/Internet LED is blinking white, your modem router is attempting to make a DSL connection with your
ISP. If the modem router establishes a DSL connection, the DSL/Internet LED turns solid white.This connection
process generally lasts several minutes.
If the DSL/Internet LED does not turn solid white, disconnect all telephones on the line. If this solves the problem,
reconnect the telephones one at a time, being sure to use a microfilter on each telephone. If the microfilters are
connected correctly, you can connect all your telephones.
If disconnecting telephones does not result in a solid white DSL/Internet LED, a problem with your wiring might exist.
If the telephone company tested the DSL signal at your network interface device (NID), then wiring in your house
might be of poor quality.
DSL/Internet LED Is Off
If the DSL/Internet LED is off , the modem router cannot connect to the Internet or to your Internet service provider
(ISP).To resolve the problem, you can try the following steps.
To reenable the modem router to connect to the Internet or your ISP:
1. If you are using a DSL connection to your ISP, do the following:
a. Disconnect all telephones on the line. If this solves the problem, reconnect the telephones one at a time,
being sure to use a microfilter on each telephone. If the microfilters are connected correctly, you can connect
all your telephones.
b. Check to see that the telephone company made the connection to your line and tested it.
c. Verify that you are connected to the correct telephone line. If more than one phone line is installed, be sure
that you are connected to the line with the DSL service. It might be necessary to use a swapper if your DSL
signal is on pins 1 and 4 or the RJ-11 jack.The modem router uses pins 2 and 3.
2. If you are using a cable or fiber connection to your ISP, check to see if all cable connections between the modem
router and the cable or fiber modem are good. All cables should be fully inserted in the ports.
3. Check to see that your login credentials are correct or that the information you entered for the ISP connection
is correct.
For more information, see one of the following sections:
Troubleshooting
287
Nighthawk X4S AC2600 WiFi VDSL/ADSL Modem Router Model D7800
287


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear Nighthawk X4S AC2600 Model D7800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear Nighthawk X4S AC2600 Model D7800 in the language / languages: English as an attachment in your email.

The manual is 6,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear Nighthawk X4S AC2600 Model D7800

Netgear Nighthawk X4S AC2600 Model D7800 Quick start guide - English - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info