710712
13
Zoom out
Zoom in
Previous page
1/54
Next page
To use WPS to connect the extender to your WiFi router:
1. Press the WPS button on the extender.
The WPS LED blinks.
2. Within two minutes, press the WPS button on your router or access point.
When the extender connects to your existing WiFi network, the WPS LED on the extender lights solid
white and the Router Link LED lights.
If the Router Link LED lights white, the connection between your router and extender is good. If the
Router Link LED lights amber or red, move the extender closer to the router and try again.
If it still does not light, see Connect With the NETGEAR Installation Assistant on page 14.
If your router supports the 5 GHz band, your extender attempts to connect to the
router’s 5 GHz band the first time you press the WPS button. If your extender did not
connect to the router’s 5 GHz band the first time, repeat the WPS process.
Note
3. Unplug the extender and move it to a new location that is about halfway between your router and the
area with a poor router WiFi signal.
The location that you choose must be within the range of your existing WiFi router network.
4. Use the Router Link LED to help you choose a spot where the extender-to-router connection is optimal.
5. If the Router Link LED doesn’t light amber or white, move the extender closer to the router and try again.
Keep moving the extender closer to the router until the Router Link LED lights amber or white.
6. Take your WiFi-enabled computer or mobile device to the location with poor WiFi router coverage.
7. Connect your WiFi-enabled computer or mobile device to the extended network.
Your extender uses the same WiFi network settings as your router for its 2.4 GHz and 5 GHz extended
networks.
For example, if your extender connects to the router’s 5 GHz WiFi band, your extender uses your router’s
5 GHz WiFi settings for both its networks:
Router 2.4 GHz WiFi network name. MyWiFiExample
Router 5 GHz WiFi network name. MyWiFiExample-5G
Extended 2.4 GHz WiFi network name. MyWiFiExample-5G
Extended 5 GHz WiFi network name. MyWiFiExample-5G
If your extender connects to the router’s 2.4 GHz WiFi band, your extender uses your router’s 2.4 GHz
WiFi settings for both its networks:
Get Started
13
Nighthawk X6 AC2200 Tri-Band WiFi Range Extender
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear Nighthawk EX7700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear Nighthawk EX7700 in the language / languages: English as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear Nighthawk EX7700

Netgear Nighthawk EX7700 Quick start guide - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info