479755
28
Zoom out
Zoom in
Previous page
1/114
Next page
Reference Guide for the Model MR314 Cable/DSL Wireless Router
2-6 Setting Up the Hardware
Connect any LOCAL port of your Model MR314 router to any port of an Ethernet hub or
switch using a standard or crossover Ethernet cable.
Because the Model MR314 router is capable of automatically sensing the polarity of the
Ethernet connection, you can connect to the other hubs normal or uplink port, using a
standard or crossover Ethernet cable. The LOCAL port of your Model MR314 router will
automatically configure itself for proper operation.
Connecting to Your Internet Access Device
To connect the router to the Internet (or WAN):
1.
Using the Ethernet cable provided with your cable modem or DSL modem, connect the
routers INTERNET port to the 10BASE-T Ethernet port on your modem.
Note:
The attached modem device must provide a standard 10BASE-T Ethernet connection. The
Model MR314 router does not include a cable for this connection. Instead, use the Ethernet cable
provided with your access device or any other standard 10BASE-T Ethernet cable. If you are using
a DSL modem, the modem’s connection to the phone line remains unchanged.
Note:
The Ethernet cable supplied by your ISP for connecting to your cable or DSL modem may
be an Ethernet crossover cable rather than a straight-through cable. It is important to use this cable
to connect the modem to your router, not to connect your PCs to your router.
Connecting the Power Adapter
To connect the router to the power adapter:
1.
Plug the connector of the power adapter into the 12 VDC adapter outlet on the rear panel of the
router.
2.
Plug the other end of the adapter into a standard wall outlet.
3.
Verify that the PWR LED on the router is lit.
Verifying Power and Connections
After applying power to the router, complete the following steps to verify that power is correctly
applied:
1.
When power is first applied, verify that the PWR LED is on.
2.
Verify that the TEST LED begins to blink within a few seconds.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear MR314 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear MR314 in the language / languages: English as an attachment in your email.

The manual is 0,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info