670579
2
Zoom out
Zoom in
Previous page
1/2
Next page
4. Connect your devices.
a. Check to make sure that WiFi is enabled on your computer or
mobile device and search for WiFi networks. Refer to the following
table, or the manual for your WiFi-enabled device for further
details on searching for WiFi networks.
© NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non-NETGEAR
trademarks are used for reference purposes only. NETGEAR, Inc., 350 E. Plumeria Drive, San Jose, CA, 95134 USA.
SUPPORT
From the Nighthawk M1 router home page, click the three dot icon
in the upper right corner to access help and support files.
Direct all calls and support for PIN numbers, SIM card registration,
account and billing information, network services, and other general
enquiries to Telstra at 13 22 00.
Direct general enquiries to Telstra at livechat.telstra.com.
See your warranty card for warranty and service information.
For additional information, visit netgear.com/support to access the full
user manual and to download firmware updates.
1 Gbps CAT 16 LTE Advanced
Up to 4X carrier aggregation
LTE 4X4 MIMO
LTE 700/900/1800/
2100/2600 MHz
3G 850/900/2100 MHz
Simultaneous Dual-Band WiFi
WiFi 802.11 b/g/n 2.4 GHz
WiFi 802.11 a/n/ac 5 GHz
TECHNICAL SPECIFICATIONS
Windows
Click the Internet Access
icon, which is usually
found on the bottom
right side of your screen.
Mac
Go to the WiFi menu
and select Network.
Mobile
devices
Go to the Settings
menu and tap the WiFi
icon.
NOTE: Your password is case-sensitive. NETGEAR strongly
recommends that you change the default admin password.
Advanced Configuration and Features
To log in to the Nighthawk M1 router home page:
1. Launch a web browser from a device that is connected to the
Nighthawk M1 router.
2. In the address field of the web browser, enter http://m.home
or http://192.168.1.1.
3. In the Sign In field, enter your admin password (default is admin),
and click the Sign In button.
Upload Media Files to the Nighthawk M1 Router
You can upload media files to either a micro SD card or a USB drive connected
to the Nighthawk M1 router. Micro SD cards and USB drives are sold separately.
To enable media and Ethernet support, you must first select the Charge Only
option under Settings > Router Setup > Use USB port for.
To upload media files to the Nighthawk M1 router with a computer:
1. Log in to the Nighthawk M1 router home page.
2. Click the MyMedia tab.
3. Drag and drop your files onto the page.
Use the Nighthawk M1 Router to Charge Other Devices
If your smartphone or other device is low or out of battery power, you can give
it a boost by connecting it to the M1’s USB port A connector. Jump boost begins
automatically once the devices are connected.
LED Status
Slow blue blink The Nighthawk M1 router is ready.
Fast blue blink The Nighthawk M1 router is transferring data.
Slow amber blink The Nighthawk M1 router is not ready.
Power Key
Turn on the router. Press and hold the Power key for three seconds.
Turn o the router. Press and hold the Power key for five seconds.
Wake the router. Press and quickly release the Power key.
Switch between screens. Press and quickly release the Power key.
Data transfer Battery power
b. Select the WiFi name displayed on your Nighthawk M1 screen.
c. Enter the WiFi password exactly as shown on the Nighthawk M1 screen.
January 2017
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear MR1100 - Nighthawk M1 Mobile Router at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear MR1100 - Nighthawk M1 Mobile Router in the language / languages: English as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear MR1100 - Nighthawk M1 Mobile Router

Netgear MR1100 - Nighthawk M1 Mobile Router User Manual - English - 87 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info