519384
16
Zoom out
Zoom in
Previous page
1/118
Next page
Reference Manual for the ME103 802.11b ProSafe Wireless Access Point
2-2 Introduction
August 2003
Key Features
The ME103 Access Point is easy-to-use and provides solid wireless and networking support.
Supported Standards and Conventions
The following standards and conventions are supported:
Standards Compliant. The Wireless Access Point complies with the IEEE 802.11b (DSSS)
and IEEE 802.1x specifications for Wireless LANs.
802.1x Support. Support for 802.1x mode is included, providing for the industrial-strength
wireless security of 802.1x authentication and authorization.
Radius Client Support. The Wireless Access Point can log in to your existing Radius server
(as a Radius client).
WEP support. Support for WEP is included. Both 64-bit and 128-bit keys are supported.
Dynamic WEP key Support. In 802.1x mode, fixed or Dynamic WEP (Wired Equivalent
Privacy) keys can be used. Dynamic key exchange can be used when deploying 802.1x
EAP-TLS.
DHCP Client Support. DHCP provides a dynamic IP address to PCs and other devices upon
request. The ME103 can act as a client and obtain information from your DHPC server.
NAT & WINS Support. Support for both NetBIOS broadcast and WINS (Windows Internet
Naming Service) allows the ME103 to easily fit into your existing Windows network.
SNMP Support. Support for Simple Network Management Protocol (SNMP) Management
Information Base (MIB) management.
Key Features
The NETGEAR ME103 provides solid functionality, including these features:
Multiple Operating Modes
Wireless Access Point. Operates as a standard 802.11b or 802.11x Access Point.
Point-to-Point Bridge. In this mode, the ME103 only communicates with another
bridge-mode wireless station. You must enter the MAC address (physical address) of the
other bridge-mode wireless station in the field provided. WEP should be used to protect
this communication.
Point-to-Multi-Point Bridge. Select this only if this ME103 is the “Master” for a group
of bridge-mode wireless stations. The other bridge-mode wireless stations must be set to
Point-to-Point Bridge mode, using this ME103's MAC address. They then send all traffic
to this “Master”, rather than communicate directly with each other. WEP should be used to
protect this traffic.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear ME 103 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear ME 103 in the language / languages: English as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info